Flashing Mileage Issue
The Flashing Mileage Issue . . .
. . . has been solved (read
this post by my brother, RoopeI

). Basically, when you’ve installed the CN+, the mileage will flash on the instrument cluster. This is due to the Body Computer detecting a foreign node on the CAN Line. The way to get around this is to install a time-delay of 4 seconds into the ignition feed; that way, the Body Computer will have finished it’s checking procedure before the CN+ becomes active on the CAN Line.
See the last page,
here, for details on the time delay circuit options (if you want them).