For goodness sake, I can stay at home and get all the nagging I need there.
OK, so here you are, my mini or miniscule guide (posh word for How To) for retro fitting a bootlight to the Sport (possibly Pop) 500. For those not aware of the fact that this is omitted during production due to costs it is a 5 minute job to fit your own, mine came from chris@souls .... eventually.... just kidding Chris!
1) Lower the seat back (if you have that option) to give a little more space. Remove posi screw that holds the NS parcel shelf support to the body and also the plastic push in clip that holds the carpet to the body.
2) Pull carpet from beneath the plastic covering on the NSR wing and also from behind the parcel shelf support.
3) Locate the wires for the boot light (mine were taped to part of the loom behind the NSR seat belt mechanism), feed them through the aperture and connect to lamp assembly and shield your eyes .... just kidding. At this stage you could start your dynamating of the NSR wheel arch. What do you know .. two guides for the price of one.
4) Refit the carpet and screw(s) (if you have any left over you're a moron and your car should be confiscated)
5) Slide lamp upwards into the aperture and push the lower edge to lock into position.
6) Stand back and admire your handiwork/handywork (delete as appropriate).
(I Don't have a photo of that as I can't multitask)