FIAT Cars

amodio
2.00 star(s) Difficulty rating
Views
79
Resolved Fiat Bravo T-jet 150 sport. Here is my wifes lovely Fiat Bravo T-Jet 150 Sport, due to Christmas and the New Year, she hadn’t used the car for about 3 weeks. Many of us know the best way to keep a FIAT in fettle, is just to use it. In the second day of January 2023, I went out to...
BlueBravoGuy
Updated
1.00 star(s) Difficulty rating
Views
1,659
Footwell Leds the easy way. Requirements: LED strip 10m cable (or 5m and fuse tap) cable striper Soldering iron and solder is not required but should be used. fuse 3A or less with fuse holder Step 1. take out interior light step 2. un-tighten all 3 screws step 3. pull 1 (2 cables if...
Cashdogg
2.00 star(s) Difficulty rating
Views
3,409
If you have any tips, let me know!
fiatbravoCB
Updated
2.00 star(s) Difficulty rating
Views
2,336
In this video you can learn (I HOPE)how to easily change your AGR valve. THE VIDEO What we need To get this job done we need this tools : I pasted the video but i will upload some images how the workflow is as well. 1. Remove the black bracket to get some space to work 2. Remove the 2...
Cashdogg
1.00 star(s) Difficulty rating
Views
2,064
Is replacing brake discs always necessary? It depends on the thickness of the disc. With some tools you can measure and check the thickness of the brake disc and decide when it's the best moment to change them out. Hope you guys enjoy!
gadge
Updated
3.00 star(s) Difficulty rating
Views
4,292
This guide is for the renewal of a front spring for a bravo and also incorporates the drop links and strut top cup with bearing. All items below will be replaced. The car featured here is a 1.4 multiair. im having problems uploading photos at the moment so will update when I have sorted them...
varesecrazy
Updated
2.00 star(s) Difficulty rating
Views
4,648
I discovered the filter whilst accessing the wiper motor.. it was filthy..so tapped out worst of the ditritis, and sourced a replacement thanks to MODERN Bravo owner gadge for supplying one at a good price(y) Lift the bonnet, use the prop in it's secured position. walk along the LEFT...
flisko
1.00 star(s) Difficulty rating
Views
3,206
http://www.italiaspeed.com/new_models/2007/fiat/bravo/technology.html
jackgoughblah
Updated
2.00 star(s) Difficulty rating
Views
8,045
I recently bought a short shifter from MTech for my 1.9 8v Bravo with the 5-speed gearbox (C350.5). After chatting to the people at MTech, they assured me this was the correct part for my gearbox. I would highly recommend getting your short shifter from them should you buy one. Tools you will...
jackgoughblah
2.00 star(s) Difficulty rating
Views
16,222
This is a guide for the top grille on your Bravo, although the steps taken in this guide would be very similar for the bottom grille as well. Firstly, you need to remove the grille off the front of your Bravo. This is done by pulling each end, one at a time, until the clips release. Once you...
Big Black Stilo
Updated
1.00 star(s) Difficulty rating
Views
10,187
The push button boot release badge can (most commonly) fall apart (after getting condensation in it), or stop working, or as in my case, both. Quick to change over and takes years off the cars age! Also you don't have to wait till it goes bandit, obviously same process as fitting the Abarth...
Matthewr1990
Updated
1.00 star(s) Difficulty rating
Views
10,454
This is a very easy fix to an otherwise annoying problem. When the slow release mechanism breaks on the glovebox it causes the glovebox to drop emptying everything on the floor. It also makes it difficult to get anything from the drivers side. As when you open it you have to try and hold it up...
Tad-bravo
Updated
1.00 star(s) Difficulty rating
Views
13,682
A lot of Bravos have a rattle behind the dashboard so here's a guide on how to fix the most probable cause for this issue. It's a 5 minute job and doesn't require any tools. 1. Inside the engine bay, locate a little removable cover on the right side of the trim covering the lower edge of the...
850kd
2.00 star(s) Difficulty rating
Views
18,742
Remove silver surround to gearshift gaiter (prise up with screwdriver ) Remove torx screws - be prepared with a T25 screwdriver. There are several screws which hold in the plastic surround to the central console and gearstick. Take them all out. The shiny plastic covers to the dash above the...
Freebo
Updated
1.00 star(s) Difficulty rating
Views
59,840
***Make Sure your engine is cool before doing this*** First of all you need: -Replacement Glow Plugs -9mm deep socket (and long reach attachment) -5mm allen key 1. Remove the plastic cover from the top of the engine 2. Locate the glow plugs at the back of the engine 3. Pop the plugs from...
stilos
Views
18,186
I bought an ECU plug with wires from a car breaker. I removed the sockets from to connect CC wires to ECU.
stilos
Updated
Views
22,303
I'll translate later. I hope pictures help. I'll upload about wiring installation, also.
Hellcat
Updated
Views
19,199
Tools needed: 6mm hex key size 2 Philips (+) screwdriver (the one included in the tool kit is good enough) Parts needed: Spare wheel. You can either use another of your road wheel, or a steel wheel. For the sport 225/45R17 I have used a 16" steel Bravo wheel fitted with 195/55R16 tyre...
stilos
Updated
Views
20,711
I have replaced the pollenfilter and I've done pictures to help U.:)
PeterMmX
Updated
Views
18,238
Removing - Position the vehicle on a lift. - Remove right front wheel - Remove right front wheel arch liner Photo 1 - Loosen the band and disconnect the turbocharger air supply hose, air filter side. Photo 2 - Undo the bolt (1a) and remove the air filter assembly (1b). Photo 3 - Remove the...
Top