I bought an ECU plug with wires from a car breaker. I removed the sockets from to connect CC wires to ECU.
I bought an ECU plug with wires from a car breaker. I removed the sockets from to connect CC wires to ECU.
Bravo Bravo 198 CC wiring
- Author stilos
- Publish date
- Article read time 1 min read
I bought an ECU plug with wires from a car breaker. I removed the sockets from to connect CC wires to ECU.
Guide information
More in FIAT Cars
-
Barchetta Ceiling lamp fixI had a problem with the ceiling lamp not working (no. 1 in the picture), even after checking... -
Panda Fitting and wiring foglampsGuide: Panda 169 Fitting and wiring fog lamps using accessory switch and independent relay... -
Panda Headlamp removalTools Required Philips screwdriver Fine and standard pliers Torx bits 10mm spanner 1/4inch drive...
-
500 (Classic) How to make a tool for when your 500's been sitting for a spell... aka fuel pump primerGents, Since I've been part-time working on improving Martina's performance (incorporating a... -
500 (Classic) Make your own RHD headlightsWhen my UK, RHD car was first MOTd, the examiner cracked one of the new, repro headlights I had...
More from stilos
-
Bravo Bravo 198 Cruise Control PrewiredI'll translate later. I hope pictures help. I'll upload about wiring installation, also.
-
Bravo Pollenfilter replacementI have replaced the pollenfilter and I've done pictures to help U.
