P1000464.JPG

Grande Punto rolfs thread

Introduction

Yes i previously had a mm thread but hadn't really done anything to the gp well that and i made an arse of myself.


So now would seem a good time to start a members motors thread as ive finally completed some more mods and am in the process of others.


Completed mods:

Purple foot well leds (just need to finish wiring in)

Purple interior light

Black drum brakes

Auxillary input for standard head unit

Blue lidl headlights

Punto brakelight cover

Rubber mats

Rubber boot liner

Halfords car maintenance kit thing (lock deicer, hi vis vest, anti freeze, rubber gloves etc)

First aid kit

Lidl wheel brace

Lidl mini compressor


Mods to fit/complete:

Purple calipers

Fiatforum decals

GSR

Custom reg plates

Planned mods (subject to change due to current lack of a job):


Blue sidelights

I.C.E setup (yet to be decided)

Merkur or Zunsport grill (painted black)

16 or 17" OZ Michelangelo 8 alloys (size dependant on weight) to be painted with purple chrme rim and gloss black spokes at a later date

Eibach sportlines

Possibly capello/linea kit

Black angel eye headlights

Black led taillights

Full stainless exhaust

Purple dash strip

Purple Abarth style side stripes

Cobra Daytona seats to replace front seats

Full interior refit in black leather with purple stitching and piping

Possibly some Vimto decals

Possibly a remap

Back 3 windows tinted limo black and max legal tint on front 3

Anyhow my gp:

P1000464.JPG

P1000463.JPG

P1000465.JPG

P1000466.JPG

IMGP3097.JPG

Brakelight cover (to be replaced as fitted in a hurry)

IMGP3096.JPG

IMGP3098.JPG

Purple interior light (looks better at night is more like a blacklight)

IMGP3099.JPG

Auxillary input lead

IMGP3100.JPG

Auxillary input lead

P1000461.JPG

Original headlining (has now been repaired under warranty along with the glovebox which didnt shut properly)

P1000462.JPG

Interior as standard


well thats my gp so any advice, ideas, opinions and comments much appreciated.
Status
Not open for further replies.
that was kind of what i was intending to get but im happy for £20. better than the crappy plastic one which looked worse. might buy some leather and make my own yet.

For the sake of this thread....do it! (y)


My plastic handbrake cover has never bothered me. Fills in the hole nicely
 
  • Thanks
Reactions: JFL
For the sake of this thread....do it! (y)


My plastic handbrake cover has never bothered me. Fills in the hole nicely

go back to standard.... or get somthing even from halfords that will look nicer :)

http://www.halfords.com/webapp/wcs/..._productId_253695_langId_-1_categoryId_165454


the plastic is shameful. looks nasty and feels it. whilst the laether could be a lot better its still better than standard

ill see if i can buy some leather at some point and make some.
 
Boot badge:
IMG_0246.JPG

Boot badge:
IMG_0247.JPG

Grill badge:
IMG_0248.JPG

Leather wheel:
IMG_0249.JPG

Gaiters, gear knob, and footwell leds (first time they have looked purple in a pic):
IMG_0250.JPG

Gaiters, gear knob, and footwell leds (first time they have looked purple in a pic):
IMG_0251.JPG

Gaiters, gear knob, and footwell leds (first time they have looked purple in a pic):
IMG_0252.JPG

Sidelights:
IMG_0253.JPG

Dipped beam:
IMG_0254.JPG

Dipped beam:
IMG_0255.JPG

Main beam:
IMG_0256.JPG

Main beam:
IMG_0257.JPG
 
Last edited:
in fairness, its not his car that is getting slated really, its more the im going to get this and that- rather than ive bought this and that and here it is fitted...

his car is ok in the metal (although i still think the angel eyes make it look a bit retarded...imo), looks as if it is looked after (ie polished etc) more than the average car on the road so Kudos where they're due!

Needs wheels and lowered though ;)
 
in fairness, its not his car that is getting slated really, its more the im going to get this and that- rather than ive bought this and that and here it is fitted...

his car is ok in the metal (although i still think the angel eyes make it look a bit retarded...imo), looks as if it is looked after (ie polished etc) more than the average car on the road so Kudos where they're due!

Needs wheels and lowered though ;)

and at leat your honest.


plus it DEFINITELY needs alloys and lowered and some decent tyres.

got quite a few things in mind especially after yesterday. so its now which i sort first.


oh and for those that are interested dont paint badges unless you can get them really cheap off ebay or the like. it isnt cost effective at all.

ie:

badges = £25 the pair
paint= (when you can get it in the uk about £4 a tin) including postage £30
lacquer= (i used a liter in total) £10

including time to sand, let coats cure, masking etc


total cost £65 minimum i estimate nearer £70 though
 
Last edited:
Status
Not open for further replies.
Back
Top