endrop - for all your online needs

General UT Restoration, New Thread. UPDATED 19/09/08 STRIPPED IT READY FOR A RESPRAY!!

Currently reading:
General UT Restoration, New Thread. UPDATED 19/09/08 STRIPPED IT READY FOR A RESPRAY!!

Re: UT Restoration, New Thread, NEW SHELL!!!!! *updated 07/02/06*

:D ta lads, and yeah, one man power is very quick down the 1/4 mile lol

anyway, Mr TNT delivery man came again today and bought me more goodies :D yay!

fiat coupe 20vt 4 pot brembos :D

08022006.jpg


and heres a pic against the standard UT front calipers! bit of a difference huh!

08022006001.jpg


what ya all think?

Dunc
 
Re: UT Restoration, New Thread, NEW SHELL!!!!! *updated 08/02/06*

cinqysxmk2 said:
that really needs lowering...:D

do you have coloured bumpers?
Click to expand...

lol, ta mate :p, it'll soon be lowered! gotta remember, theres fook all weight in it at mo, and the uno shells arent exactly the heaviest of things! when its got engine, cage, interior and wound to the floor on coilovers it'll be low, trust me hehe ;)

as for the bumpers, they'll be staying black and origianl like uno turbo bumpers should be, colour coded does look good, but i prefer old skool black like they were new!

ta for the comments on the brakes, as for the rears, the standard UT rear discs and calipers will be more than up to the job. even as standard, when the UT came out, they always said the rear discs were a bit too much for the Ut and not nessecery! so, i'll be leaving them as they are, but new grooved discs and some uprated pads.

Dunc
 
Re: UT Restoration, New Thread, NEW SHELL!!!!! *updated 08/02/06*

cinqysxmk2 said:
cool... them brembo's are HUGE! what size wheels you got to go on there?
Click to expand...

i had 16" compomotive mo's made to order, and also made to fit over the brembo calipers and dicscs of a coupe. so will fit on no probs hehe

and, yes, my thoughts were exactly that "bloody hell those are massive!"

Dunc
 
Re: UT Restoration, New Thread, NEW SHELL!!!!! *updated 08/02/06*

Good to see this moving along Dunc, and those callipers will work a treat (previous convo with you) they are the same (or near as dammit) as integrale EVO callipers apart from the integrale ones have a raised "LANCIA" on them rather than a Brembo sticker, the Brembo marking is saved for inside the calliper. By the way stickers are replaceable should you wish to change the colour of them or even repaint silver. :cool:

The rear brakes on any car do very little work, but in a FWD car which has a weight distribution favouring the front the do so little, my old R5GTT's rear brakes still has the same pads on it that I fitted 7 years ago when i fitted Black Diamond drilled disc's, they still look like they have had no wear on them and that was with brand new callipers being fitted at same time. :eek:

Aaron.

PS Compo Mo's are cool, i have white ones on my Cinq!
 
Re: UT Restoration, New Thread, NEW SHELL!!!!! *updated 08/02/06*

looking good (y)
 
Re: UT Restoration, New Thread, NEW SHELL!!!!! *updated 08/02/06*

you may have 1950kg's of sweedish brick on the same track as you when you finish, I am thinking of sticking the resonably good B230K block into the 240 saloon, and putting a B230FT (full turbo) with some interesting mod's into the 740 estate, stock I'm looking at 200bhp (after rebuilding it and blueprinting, or modding internals, depends what I can get), following a stupidly massive (probably undrivable sort of power) volvo truck turbo (common as well) hybrid, and a few other choice mod's it'll be looking at 400-480bhp, problem is the stock B230FT crank won't hold more than about 350bhp on a regular basis, neither will the gearbox :(

A more resonable build and one that will still be drivable will kick 280bhp, and 330lb.ft, can do it for about £550 for the latter aswell(y)

or maybe put the 230FT in something smaller? FIat tempra etc
 
Re: UT Restoration, New Thread, NEW SHELL!!!!! *updated 08/02/06*

Dunc Uno Turbo said:
cheers aaron, should be mint at slowing it up on the hot track days! i shall be repainting them in red but unsure which paint to use? i've seen the white Brembo caliper stickers i want.

Dunc

p.s. and yes, comp mo's rock!
Click to expand...
you can get the paint and decals in a kit on ebay ;) a guy called ubernine or something like that. i got my abarth ones from him, good guy and quick delievry

http://cgi.ebay.co.uk/Brembo-Brake-...034734119QQcategoryZ23013QQrdZ1QQcmdZViewItem

do them silver, silver would look cool behind the anthracite and green ;)

charlie
 
This post contains affiliate links which may earn a commission at no additional cost to you.
Re: UT Restoration, New Thread, NEW SHELL!!!!! *updated 08/02/06*

Will it be ready for brooklands and stanford hall Dunc?
 
Re: UT Restoration, New Thread, NEW SHELL!!!!! *updated 08/02/06*

cheers peeps, glad ur enjoying it :D

charlie, gonna paint em red with the brembo written in white, just worried the stickers will come off! lol

apple, when is brooklands? if its end of may/june then i hope so! fingers crossed!

(y) ta andy, yeah i too am hoping it'll be done soon! defo before summer :D

savage, heres the lastest update below ;)

right, had the day off work, so started prepping the shell ready to go for its respray!

heres what we started with, me getting the front bumper off, had to be cut off cos the bolts were all rusted up!

10022006.jpg


once this was off, i had to work out which parts needed angle grinding off the shell to get my intercooler to fit, and luckerly only the centre bumper bracket had to go :p

10022006002.jpg


after this, me and my mate started on the inside,chipping off all the ghey sound proofing that fiat fitted, took ages to get all this off but hey, its gotta be done!

10022006003.jpg


10022006004.jpg


we then had a cuppa tea and cracked back on. i want to make sure all the holes are drilled before it goes for its respray, so fitted and drilled the holes for my alloy battery tray in the boot

10022006006.jpg


after this, we got the drill out again and drilled the new holes ready for my mk1 hatch to go on, this was a bit of a bugger, also fitted the mk1 boot catch and release

10022006009.jpg


^^^ also fitted the bumper temperally due to it getting damaged in the garden and mum moaning about it!

heres a quick photo at the end of the day, well about 2:45pm cos i had to go to derby to meet alex's mum (ghostwkd) to give her my UT discs and calipers which ghost has bought off me :D

10022006007.jpg


then, it was a case of tidying up when i got home, reoganise my litte shed and clear some crap out and unneccesery things like interior plastics hehe! :D

thats all so far folks! but im goin as hard as i can at it!

(y)

Dunc
 
Last edited:
You must log in or register to reply here.

Similar threads

M
Technical Need Help for a automatic heater
Replies
0
Views
64
MJVP
M
S
Technical what is the fuel tank capacity on the ut mk2?
Replies
0
Views
578
Sotogun
S
S
Technical best dump valve for ut 1.4?
Replies
0
Views
495
Sotogun
S
Keith 94
General A part of a childhood to revisit - Fiat Uno
Replies
1
Views
438
The Panda Nut
The Panda Nut
D
  • Question
Technical need a expert on single injection unit on uno 1108 cc
Replies
0
Views
211
dickbarnes
D
Back
Top