my panda 1.1 eco started doing the odd misfiring trick
not good for a 3 year old motor.
did the normal stuff new HT leads and a new coil pack swapped around etc,
Had it checked over by a decent garage and they said to get Fiat Ht leads instead of the chepo ones i had bought .
Then called into a auto electrical engineer in my neck of the woods in durham.
he said straight away what the problem was as he had done 3 other panda's before.
The wiring loom has a plug hidden away under the tape and the pins in the connector needed looking at and re crimping and also that one of the wires also needs cutting out and replacing because it goes brittle.
fiat needs to address this as i have 3 fiats in my ownership
and will think again before i by another one
left it with him for the day and he only charged £60
my panda is now back to normal
not good for a 3 year old motor.
did the normal stuff new HT leads and a new coil pack swapped around etc,
Had it checked over by a decent garage and they said to get Fiat Ht leads instead of the chepo ones i had bought .
Then called into a auto electrical engineer in my neck of the woods in durham.
he said straight away what the problem was as he had done 3 other panda's before.
The wiring loom has a plug hidden away under the tape and the pins in the connector needed looking at and re crimping and also that one of the wires also needs cutting out and replacing because it goes brittle.
fiat needs to address this as i have 3 fiats in my ownership
and will think again before i by another one
left it with him for the day and he only charged £60
my panda is now back to normal