Hi there.I am a new member from the northeast UK.My daughter has a 2013 500.The problem with dead clutch pedal occurred a couple of months ago.She tried to engage first gear and found that the clutch pedal was almost on the floor.Her friend a mechanic,diagnosed a bad slave cylinder and replaced it.All was well for a couple of weeks,but then the problem came back.The friend took it away and all was well again for about 6 weeks,until I got a call from my daughter saying it was not engaging again and that she didnt want to go back to her friend.I took a look this morning and was going to move it,as I had been told that you can engage 3rd gear without the need of the clutch.I couldnt get into any gears at all only the crunching sound when trying to engage reverse.There is about 1 inch of travel left on the clutch pedal and when depressed the piston on the slave cylinder moves very slightly.I have read that the hydraulics are a pig to bleed,and was wondering if that could be the trouble.Any help will be greatfully received