froze my nuts off today putting in new wishbones on the cinq.
on the drivers side when i removed the arb/suspension arm rear mount,the 2 bolts(19mm)were a sod to get out. tight all the way.
well upon inspection the threads are damaged mainly on one of them and its tight going back in.
tried another bolt but the threads started to strip on the bolt
dont know whether they have been removed before or if this is from the factory.
sooo i'll get a new bolt tomorrow but im wondering if i'll need to do something with the thread in the chassis as well?
any ideas?
:bang:
on the drivers side when i removed the arb/suspension arm rear mount,the 2 bolts(19mm)were a sod to get out. tight all the way.
well upon inspection the threads are damaged mainly on one of them and its tight going back in.
tried another bolt but the threads started to strip on the bolt
dont know whether they have been removed before or if this is from the factory.
sooo i'll get a new bolt tomorrow but im wondering if i'll need to do something with the thread in the chassis as well?
any ideas?
:bang: