Neville Minuti
Member
- Joined
- Jan 14, 2017
- Messages
- 20
- Points
- 59
Hi,
I have a 1988 1000cc panda with 240k kms. I notice that the temperature gauge is marking between the 100 and 110. I have changed the water pump, thermostat and radiator. At 90 the fan comes in.
The bleeding from the radiator is done.
Just to add that I have eliminated the cabin radiator as it was faulty. I have connected the outflow manifold flow to the return of the radiator. Pls vide attached.
When I tried with an infrared temperature sensor, the temperature at the temperature gauge sensor marked 89 -
Could it be the sensor is Indicating incorrectly?
Thanks
I have a 1988 1000cc panda with 240k kms. I notice that the temperature gauge is marking between the 100 and 110. I have changed the water pump, thermostat and radiator. At 90 the fan comes in.
The bleeding from the radiator is done.
Just to add that I have eliminated the cabin radiator as it was faulty. I have connected the outflow manifold flow to the return of the radiator. Pls vide attached.
When I tried with an infrared temperature sensor, the temperature at the temperature gauge sensor marked 89 -
Could it be the sensor is Indicating incorrectly?
Thanks
Attachments
Last edited: