I recently got a Tomtom blue & me 2 live Bought from a friend. now I can't get the tomtom paired with the Punto Evo 1.4 8v from 2010. I have already updated the Blue & me to version 5.6 but still no result. does anyone here know how i get this work.
Any chance you can send me that file [email protected]Hi,
I can help you. The TomTom2 needs 2nd Generation V10 update. 5.6 is no good.
It is not too difficult but you need certain files downloaded from the BlueMe website.
Stage 1 reads your current cars software nothing else. When this file is obtained from the car it needs a line code change which is then sent back to the Blueme site together with your cars model and then all the latest software is downloaded. Transferred onto a USB flash memory stick formatted to FAT32 and uploaded into the car.
At the same time you have to select your language of choice.
You can do it yourself or I can transfer files to you but you will need a 2GB USB flash memory stick, a windows PC and a lot of tenacity.
To transfer files I need your email address so PM me with it and I can outline the procedure. For the real computer 'dummies' excuse the expression but if you have no computer ability or use a windows PC I can send out the files on a USB stick for the cost of postage and a promise you send the memory sticks back but please only UK/Irl anyone abroad it will be file transfer only.
BYE
The UK language version is in our downloads sectionAny chance you can send me that file [email protected]
I dont think you can just take the files for the updates and use for any vehicle....this only works with the language files.....The UK language version is in our downloads section
Blue&Me 10 Update (UK)
UK editions of the Blue&Me v10 Software Versions A and B appear to be exactly the same - the checksums are identical - however as they were both available on the original site, I'll put them both on here :)www.fiatforum.com
Hi, I have all the files returned from the blueme website as I have done updates on Alfas, Fiats Lancias and other Chrysler group cars as the install a TOMTOM2 you had to have a gen2 module and it needed to be at V10 then we were able to tweek the BMConf file to tell the car to accept a TOMTOM2.......the files definitely have some parts unique to the car as when a TomTom2 is paired the car populates the TomTom2 with the Marque model and all the cars data.......It is a pain that the site isn't up, as I would be able to confirm that.
I didn't download the files using the configurator though - I just looked through the sites XML files to see which files were sent when you selected which vehicle. I don't believe they were different based on any code - the code was just a "lookup" to decide which file was needed.
Easy way to confirm this though If you still have some of the files for different models, you can run a checksum test on them to see if there really is any difference. If there is, we could look into what that difference is and then perhaps write an alternate tool.
or for ease lets just go for a V10 from two cars of exactly the same model as I can use our own car and a previous 500 model I know we did for a lady owner.......