Mr FIAT - Your #1 source for vintage car parts

Stilo 1.8 Dynamic

Currently reading:
Stilo 1.8 Dynamic

need some 18mm spacers. anyone know of any 16-18mm spacers going. also anywhere i can buy some studs or bolts to allow for the extention in length
 
Clock34 said:
haha yeh. just need spacers, bolts and adapters made.... lol
Click to expand...

Auch that's nothing compared to getting the proper set :laugh: Don't think I've actually seen anyone pay full price on the proper Brembo set. I know a chap who lived down in London and had a properly sorted 5dr Abarth (all the braces, 18" Super Ts, working GSR and remap) who sourced the proper set of Schui Nick (can't remember the exact username) for I think double what you paid and that was about 3 years back I think at least. Sung the praises of them though so well worth the punt :)
 
aye kit was 1900 new i think haha... for 305 disks with the exact same callipers. the guy you are on about i was looking at his posts he payed just shy of 1k.

these are costing me £60 for callipers pads, disks... should be fun but i could do without the extra cost of the spacers ect.




will 18mm spacers be ok with blades... will they still fit in the arch?
 
Clock34 said:
aye kit was 1900 new i think haha... for 305 disks with the exact same callipers. the guy you are on about i was looking at his posts he payed just shy of 1k.

these are costing me £60 for callipers pads, disks... should be fun but i could do without the extra cost of the spacers ect.




will 18mm spacers be ok with blades... will they still fit in the arch?
Click to expand...

Thought it was way less than that, like £1k for the Brembo kit off the shelf and he'd gotten them cheap. Oh well :laugh:

Not sure about that amount of spacing really. Would be fine on the back I'm sure, not sure about the front though in terms of turning angle and such.
 
15mm will do too and look cool as fook

DSC004571.JPG



ANDDD you know they fill the 17s a sod load better with the 305mm disks than my 280s and all the other stilo 250's
DSC004563.JPG
 
well i may, but its doing it and keeping them looking good as you dont want bad looking brembo's. depends how silver looks on the car also....

ive been looking around the web and will settle for 305 front disks but want to upgrade the rears from what i think are 240mm. i will space the calliper out and try to fit larger but i dont know of any fiat solid disks that are larger than 240 so any help will be great.
 
lol the only way the clearence would make a difference is if the bearing went on the wheel but ill be getting new ones soon anyways.


also to clear up there not my brembo's or wheels. although i am getting a set there not here yet, and i do have identical wheels :p
 
You must log in or register to reply here.

Similar threads

bad_boy_cinq
the Dirty derv the stilo
2 3
Replies
56
Views
8K
bad_boy_cinq
bad_boy_cinq
M
My Stilo
Replies
10
Views
2K
Mr-A
M
C
  • Locked
Bravo 1.8 HLX (no name)
2 3
Replies
48
Views
4K
Andi9386
Andi9386
muppet42
RGZ the Stilo
10 11 12
Replies
222
Views
11K
muppet42
muppet42
Back
Top