Weissmuller
New member
- Joined
- Dec 13, 2020
- Messages
- 5
- Points
- 2
Good evening everybody
First of all, let me apologise for my English as it’s not my native tongue.
It’s s the first time I’m posting on the forum and I’d like a helping hand.
So, I have a 3door Fiat stilo 1.4 16v 2004 model and my power windows, both of them,at the same time, stop working...all the rest, central locking and mirrors are working. When I push the buttons to open the windows I hear a single click from the relay inside the module located in the door panel. Driver’s and passenger’s side do the same click.
Long story short, checked the fuses, checked T13 relay (also bought a new one to be sure), checked the cables that go to the doors, checked both switches, checked the window motors ( directly connecting them with the battery to check ) windows moved normally so it is not the regulators, checked the pin connectors and cables that go to the modules and finally as I couldn’t find anything wrong, I bought new modules for the doors….but…..nothing changed, a single click and nothing moves.
I would very much appreciate it if anyone has addressed the same problem and found a solution or if you have something to purpose, other than the obvious solution of a professional.
Thank you,in advance, for your time.
First of all, let me apologise for my English as it’s not my native tongue.
It’s s the first time I’m posting on the forum and I’d like a helping hand.
So, I have a 3door Fiat stilo 1.4 16v 2004 model and my power windows, both of them,at the same time, stop working...all the rest, central locking and mirrors are working. When I push the buttons to open the windows I hear a single click from the relay inside the module located in the door panel. Driver’s and passenger’s side do the same click.
Long story short, checked the fuses, checked T13 relay (also bought a new one to be sure), checked the cables that go to the doors, checked both switches, checked the window motors ( directly connecting them with the battery to check ) windows moved normally so it is not the regulators, checked the pin connectors and cables that go to the modules and finally as I couldn’t find anything wrong, I bought new modules for the doors….but…..nothing changed, a single click and nothing moves.
I would very much appreciate it if anyone has addressed the same problem and found a solution or if you have something to purpose, other than the obvious solution of a professional.
Thank you,in advance, for your time.