Technical Panda Cross 4x4 what model in MES

[Kev_marea]

I have a Fiat Panda Cross 4x4, 2009, with 1248cc diesel engine, is this supported in MES?

I just now connected using the red lead to the airbag
Using Panda '03 Van 1.3 JTD/Multijet
and using the TR3 MY99 Airbag (2F-2P-2L-I)

the model is the closest I could think of
and the airbag just chosen at random. How are we supposed to know which airbag module to use?

I got connected to the airbag module I didn't know what to do next, then I saw latency too high so I disconnected.

This laptop is quite hot so I'm surprised it is high this has an Intel Core i7
Where do I find the instructions on setting the latency?

 

[portland_bill]

Have a look at this thread,https://www.fiatforum.com/panda/352156-fiatecuscan.html, especially post #5 , follow the instructions step-by-step.
Also have a look at this thread,https://www.fiatforum.com/tech-talk/340781-mes-set-up-help-required-please-2.html, last post, #19 .

Your vehicle is not a van, so choosing this may exclude some fitments. My guess would be Panda '03 1.3JTD/Multijet

 

[Kev_marea]

Thankyou sir, I'll give it a go...

 

[Kev_marea]

Hi,

Success, I did as you said and have reset the airbag light on my Punto,

I was just testing it on the Panda Cross - the Panda does not have any faults.

Thank you.