Technical  Panda 100hp front bumpstops?

Currently reading:
Technical  Panda 100hp front bumpstops?

dac69er

Established member
Joined
Nov 26, 2014
Messages
1,163
Points
346
Location
suffolk
The front bumpstops on my girlfriend's 100HP are rotten so I was going to swap them out.

Has anyone purchased a set of replacements before to be able to confirm which I need please?

I was looking at the febi 36819?

Thanks
 
Febi 36819 were what I put on my 100HP and looked the same as what I took off the car.

I bought a pair for £9.39 including postage from simplycarparts on ebay.
 
Thankyou.

Hopefully they won't look the same as the ones I would be taking off look knackered!!!!
 
Febi 36819 were what I put on my 100HP and looked the same as what I took off the car.

I bought a pair for £9.39 including postage from simplycarparts on ebay.

I just emailed them and the item for £9.39 from that seller is just a single so I would need to buy 2 :(
 
You need one for each side. You will also need the concertina "boot" to keep the dirt out.

Worn shock absorbers (dampers) give the bump stops a hard time. I could be worth a look.
 
Last edited:
Have a look at item number 303284544607 on ebay. The description tells you you get one, but the picture shows a pair so I'd guess the description is referring to one pair and the price is £9.38 including postage.
 
Have a look at item number 303284544607 on ebay. The description tells you you get one, but the picture shows a pair so I'd guess the description is referring to one pair and the price is £9.38 including postage.

I messaged them too and they said it was for a single.

I gave up and just bought 2 of the cheapest singles. Came to about £14.

The dampers don't leak, but they could be knackered after 140k miles. Will see what they are like when I get them out to change the bumpstops and gaiters.
 
Bumpstops fit perfectly. Dampers are still fine too, which was a bonus :)

Sorted the rattle too
 
Back
Top