Technical Immobilizer light staying on

[Angelock]

I currently have an issue with immobilizer light staying on

I have a 200i Fiat punto and immobilizer light stays on I have ran diagnostics and found some codes in the attachments

Any help / suggestions welcome

Thank you

 

[varesecrazy]

Same with both keys?

 

[Angelock]

Same with both keys?

Only have one key

 

[varesecrazy]

The B code means the chip in your key isn't being recognised

Worth trying a few things like removing other keys,

and ensuring car battery is fully charged
(potentially Low due to Blue and Me issue)

 

[Angelock]

The B code means the chip in your key isn't being recognised

Worth trying a few things like removing other keys,

and ensuring car battery is fully charged
(potentially Low due to Blue and Me issue)

Would recoding the same key to the car be worth a shot? I've not tried charging it but if I turn the car over just before the immobilizer light comes on it cranks well

 

[Angelock]

The B code means the chip in your key isn't being recognised

Worth trying a few things like removing other keys,

and ensuring car battery is fully charged
(potentially Low due to Blue and Me issue)

Battery is at 12.2 volts

 

[varesecrazy]

Undo the plastic panel lying around the key barrel

Lift out the "aerial ring" place the key directly inside it

That should improve things

 

[GrandePunto PL]

New thread instead of searching for existing content...OK.
B-code solved here: https://www.fiatforum.com/threads/b1001-13-fault-help.502836/
https://www.dtcdecode.com/FIAT/B1001-13

 

[Angelock]

After inspection of the key I've found this

 

[varesecrazy]

PCB,

What about it?

 

[Angelock]

PCB,

What about it?

The copper is completely snapped off