Mikefraser93
Member
Hello, bought this car on 1st of January, had problems with it since
Goes into limp mode with s/s warning and check engine. Plugged my code reader in Get error code p0340.
Changed the cam position sensor, crank sensor, fixed boot wires, changed earth strap, changed brake light switch and removed and cleaned vvt solenoid.
It still does it! Can be fine for a day or two then does it non stop. Some times the rev gage goes to 0 won't accelerate, turn it off and on and it drives again but lights still on.
Don't know what else to try. Any help with be great fully appreciated!
Goes into limp mode with s/s warning and check engine. Plugged my code reader in Get error code p0340.
Changed the cam position sensor, crank sensor, fixed boot wires, changed earth strap, changed brake light switch and removed and cleaned vvt solenoid.
It still does it! Can be fine for a day or two then does it non stop. Some times the rev gage goes to 0 won't accelerate, turn it off and on and it drives again but lights still on.
Don't know what else to try. Any help with be great fully appreciated!