Hi all, just got my new lounge, I'd like to protect the top of the rear bumper. I see there are plenty of boot sills available from £5 - £75.
Anyone have these? What's recommended?
Thanks
Anyone have these? What's recommended?
Thanks
I have a genuine Fiat bumper gaurd on mine. Bought from Fiat dealer through eBay and cost about £40. In black, it looks like it was there from the factory (on my 4x4). The ‘genuine ‘ part is actually made by RGM Reargaurds. Note there are three different ones, to perfectly fit the different bumper profiles of the ‘regular’ Panda, the 4x4 and the Cross (inc Waze) models.
Hi all, just got my new lounge, I'd like to protect the top of the rear bumper. I see there are plenty of boot sills available from £5 - £75.
Anyone have these? What's recommended?
Thanks
I have the fiat black plastic one, about £40 (after discount), easy fit. I also bought the fiat plastic with metal strip door sill guards, and the boot tray.
Definitely a good investment for me as a I have a medium sized dog, who jumps up into the boot, and claws would have scratched the paintwork. Occasional cleaning with a 'back to black' type shiner, restores it to 'new' look, although this makes is slippy for the dog for about a week.
Yes, they go under the rubber strip.I bought mine at blackparts.it, but did not fit them.
Do they go under the rubber strip or not??
I do not feel sure.
And should you seal them, so no water is trapped underneath?
I found it was much easier to fit the sill protectors if you first pull the rubber strip away from the sill seam - and then push it back on after fitting the covers. The rubber is a push fit: see photos...Yes, they go under the rubber strip.
NOW you tell me lolI found it was much easier to fit the sill protectors if you first pull the rubber strip away from the sill seam - and then push it back on after fitting the covers. The rubber is a push fit: see photos...
I found it was much easier to fit the sill protectors if you first pull the rubber strip away from the sill seam - and then push it back on after fitting the covers. The rubber is a push fit: see photos...