- Deep 10mm 1/4 drive socket
- 4-6inch 1/4 drive extension bar
- 1/4 drive UJ section
- 1/4 drive Ratchet
- Trolley Jack
- Next page: Procedure
Stilo Handbrake Adjustment
- Author richydraper
- Publish date
- Article read time 1 min read
Table of contents
Guide information
More in FIAT Cars
-
Barchetta Ceiling lamp fixI had a problem with the ceiling lamp not working (no. 1 in the picture), even after checking... -
Panda Fitting and wiring foglampsGuide: Panda 169 Fitting and wiring fog lamps using accessory switch and independent relay... -
Panda Headlamp removalTools Required Philips screwdriver Fine and standard pliers Torx bits 10mm spanner 1/4inch drive...
-
500 (Classic) How to make a tool for when your 500's been sitting for a spell... aka fuel pump primerGents, Since I've been part-time working on improving Martina's performance (incorporating a... -
500 (Classic) Make your own RHD headlightsWhen my UK, RHD car was first MOTd, the examiner cracked one of the new, repro headlights I had...
More from richydraper
-
Stilo Wiring ColoursAs with so many wiring applications these days there are flat coloured wires and coloured with... -
Stilo Rear Bulb ReplacementHey Guys and Girls!! ive taken it upon myself to do a guide for the rear lights as i was a...
-
Stilo Engine Oil Change (1.6 engine)Introduction Engine Oil:- mineral oil doesnt last as long therefore u need more oil changes...
-
Stilo Changing Spark Plugs (1.6 engine)Tools and Parts 4 NGK 'BKR5EZ' Spark Plugs (46531918) Feeler Gauge (0.80mm) 3/8' Drive Ratchet...
-
Stilo Bleeding BrakesIntroduction Brake fluid is what is called HYDROSCOPIC/HYGROSCOPIC this means "Having the...