Hey Peeps,

Need some help here, i'll got no idea how would i go about checking.

Could someone check if alfa 156 (X-reg) rear caliper would do fine on our cento ?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200432725357&_trksid=p2759.l1259

Or how would i find out?

I'll found the list of caliper that fit:

ALFA ROMEO / Alfa 145 / 1.4 (96-2001)
ALFA ROMEO / Alfa 145 / 1.6 (96-98)
ALFA ROMEO / Alfa 145 / 1.6 TS (97-2001)
ALFA ROMEO / Alfa 145 / 1.7 16v (96-98)
ALFA ROMEO / Alfa 145 / 1.8 TS (97-2001)
ALFA ROMEO / Alfa 145 / 1.9 TD (96-2001)
ALFA ROMEO / Alfa 145 / 2.0 (95-2001)
ALFA ROMEO / Alfa 146 / 1.4 (96-2001)
ALFA ROMEO / Alfa 146 / 1.6 (96-98)
ALFA ROMEO / Alfa 146 / 1.6 TS (97-2001)
ALFA ROMEO / Alfa 146 / 1.7 16v (96-98)
ALFA ROMEO / Alfa 146 / 1.8 TS (97-2001)
ALFA ROMEO / Alfa 146 / 1.9 TD (96-2001)
ALFA ROMEO / Alfa 146 / 2.0 (95-2001)
ALFA ROMEO / GTV / 2.0 (96-)
ALFA ROMEO / GTV / 2.0 Turbo (97-)
ALFA ROMEO / Spider / 2.0 TS (95-)
ALFA ROMEO / Spider / 2.0 Turbo (97-)
FIAT / Barchetta / 1.8 (99-)
FIAT / Brava/Bravo / 2.0 (97-2002)
FIAT / Coupe / 2.0 20v (96-2000)
FIAT / Marea / 1.8 (97-2000)
FIAT / Marea / 2.0 (97-2002)
FIAT / Marea / 2.4 TD (97-2000)
FIAT / Marea Weekend / 1.8 (97-2001)
FIAT / Marea Weekend / 2.0 (97-2001)
FIAT / Marea Weekend / 2.4 TD (97-2001)
FIAT / Punto / 1.4 Turbo (97-99)
FIAT / Punto / 1.6 (97-99)
FIAT / Punto / 1.7 TD (97-99)
FIAT / Punto / 1.7 TD (97-99)
LANCIA / Delta / 1.6 (97-2000)
LANCIA / Delta / 1.8 (97-2000)
LANCIA / Delta / 1.8 (97-99)
LANCIA / Delta / 1.8 LS (98-2000)
LANCIA / Delta / 2.0 (96-2000)
LANCIA / Delta / 2.0 (96-2000)
LANCIA / Delta / 2.0 Turbo (96-2000)

But 156 is not in it, just want confirmation.

Thanks
Ming

Yes it fits exact ones i run

bleed nipple taps the inner arch so you need to tap the arch in a tad just the flappy bit. never done any major damage to mine. you can see a light scratch just above the calliper.

mine was off a marea estate just to let you know so not a alfa but it looks exact

hmm. might just go ahead with it then. where did u get the mouting plate ?

What marea did it come out of ? Is it on the list?

ming

the marea i got it of is on the list, a 2.4 td weekend estate.

i got the brackets from a guy on here they worked perfectly but with they were 0.5 -1mm thicker. dont know who though.

If you take this to an engineer they should be able to sort it for you, I've done a test piece and the fitting holes that hold it to the hub fitted great, I didn't have a caliper so I don't know how well that part fits.

I got the image from the guides:
https://www.fiatforum.com/cinquecento-seicento-guides/172993-rear-disc-brake-conversion-ii.html

I'm pretty sure Alfa 155 rear calipers fit as well.

156 caliper seems to use bigger disc ... rather than 240x11.

Ming

155 calipers do fit, theres a list in the guides of calipers.

Just found some GTV ones from a 99, but list states up to 97, does this mean that they changed them and won't be completely plug and play?

Also i'm guessing they will be 240mm as that is what i'm after.

Thanks

Todger182 said:

155 calipers do fit, theres a list in the guides of calipers.

Just found some GTV ones from a 99, but list states up to 97, does this mean that they changed them and won't be completely plug and play?

Also i'm guessing they will be 240mm as that is what i'm after.

Thanks

Click to expand...

Aye but, does 156 caliper fit ~?

Ming

There are too many 156 variants to be sure.

I use

www.brakeparts.co.uk

The online catalogue gives all the options available, so get more info from the seller and check them out against the catalogue.

Cheers

SPD

Yeah am using them forgot to update is a 156 1.8 TS. It seems from the list i really need to look for BCA3038 and 156 1.8 TS listed BCA2730.

Ming

Benjammo said:

If you take this to an engineer they should be able to sort it for you, I've done a test piece and the fitting holes that hold it to the hub fitted great, I didn't have a caliper so I don't know how well that part fits.

I got the image from the guides:
https://www.fiatforum.com/cinquecento-seicento-guides/172993-rear-disc-brake-conversion-ii.html

Click to expand...

Get it laser cut holes and all will be accurate enough to use straight off the cutter machine.

This is my version.






I used Punto GT protector plates

Im running coupe 20valve ones

hey cc1 what paint you using on those calipers?

Absoluteleft said:

Im running coupe 20valve ones

hey cc1 what paint you using on those calipers?

Click to expand...

VHT from http://www.frost.co.uk/item_Detail.asp?productID=8205