Technical Warning lights

Currently reading:
Technical Warning lights

Duffys Dad

Member
Joined
Feb 19, 2011
Messages
99
Points
86
Hi. I have a 2011 500 C Lounge Twinair
I have 3 warning lights coming on together. Stop/Start unavailable. EPS unavailable and Hill Start assist unavailable.
Probably a sensor has gone, but do you know which one and where?
Many thanks.
 
I know a low battery can stop the Stop Start from working but not sure why it should effect eps or hill start assist? My thought was that a sensor which detects when the wheels have stopped turning is playing up as all 3 of these systems would need to know if a wheel has stopped turning
 
The issue dose seem to be related to me pressing the brake pedal.. if I start up the car the lights are out but usually they come on when I apply the brakes. Maybe a clue. Guess a brake light switch is not very expensive so could just try changing that. Thanks for the tip.
 
Check if your brake lights are coming on, although I think most pedal switches have two sides to them these days. Might be worth a check though.

Pretty sure the switch is under the passenger side glovebox area due to lhd conversion.
 
Thanks for the tip. I would have started looking on the Drivers side.
 
Back
Top