Technical  Unknown boot cable...

Currently reading:
Technical  Unknown boot cable...

scottboxx

New member
Joined
Mar 10, 2026
Messages
5
Points
3
Location
Bristol
Am loving working through these issues, I hope being a complete info sponge isnt too annoying to y'all..? After I (we) fixed the fluid reservoir I moved on to the issue of flashing brake lights = easily fixed by cleanign the contacts in the light housing. But before i took out the housing i removed the boot carpet and found a cable that seemed to go nowhere. I took a photo - see attached images. Any thoughts..? As always - mucho appreciado hombres :)
 

Attachments

  • panda-unknown-boot-cable1.jpg
    panda-unknown-boot-cable1.jpg
    279.8 KB · Views: 21
  • panda-unknown-boot-cable2.jpg
    panda-unknown-boot-cable2.jpg
    155.7 KB · Views: 17
Am loving working through these issues, I hope being a complete info sponge isnt too annoying to y'all..? After I (we) fixed the fluid reservoir I moved on to the issue of flashing brake lights = easily fixed by cleanign the contacts in the light housing. But before i took out the housing i removed the boot carpet and found a cable that seemed to go nowhere. I took a photo - see attached images. Any thoughts..? As always - mucho appreciado hombres :)
There's a few unused cables on the panda

Boot light
Speed sensor
Parking sensors
Active arial
Seat belt warning
Heated seats
Bass speak
And so on

If it passengers side near the rear seat. boot light is favourite, but it does not usable, I can only see one wire instead of the normal two
 
Back
Top