Technical Torque settings

Currently reading:
Technical Torque settings

bandido41

Bandido A Maneira!!
Joined
Feb 15, 2007
Messages
2,045
Location
johannesburg
IS there anyone you can perhaps give me the torque settings for the flywheel on a 100 sx turbo diesel bravo i cant find it on babarmalik and i my haynes manual is for the petrol cars (and i cant find it :eek:) Thanks guys and gals
 
Last edited:

jug

blessed are the apostates
Joined
Nov 28, 2005
Messages
27,935
Location
Durham
sorry cant find it :(

they need to be tight, i'd estimate 85nm

dont forget to tighten in sequence, finger tight first, then quarter turns each, better safe than sorry.
 
Last edited:
OP
OP
bandido41

bandido41

Bandido A Maneira!!
Joined
Feb 15, 2007
Messages
2,045
Location
johannesburg
Just in case someone else might be interested in this information the flywheel is meant to be torqued at 160 newton metres (sorry dont know how much that is in pounds per foot.) hope this comes in useful to someone else (y)
 
OP
OP
bandido41

bandido41

Bandido A Maneira!!
Joined
Feb 15, 2007
Messages
2,045
Location
johannesburg
Thats what i got from the mechanic, i went past and he looked it up on his computer so thats what i used.
 
Top