Technical Torque settings

Currently reading:
Technical Torque settings

bandido41

Bandido A Maneira!!
Joined
Feb 15, 2007
Messages
2,045
Points
346
Location
johannesburg
IS there anyone you can perhaps give me the torque settings for the flywheel on a 100 sx turbo diesel bravo i cant find it on babarmalik and i my haynes manual is for the petrol cars (and i cant find it :eek:) Thanks guys and gals
 
Last edited:
sorry cant find it :(

they need to be tight, i'd estimate 85nm

dont forget to tighten in sequence, finger tight first, then quarter turns each, better safe than sorry.
 
Last edited:
Just in case someone else might be interested in this information the flywheel is meant to be torqued at 160 newton metres (sorry dont know how much that is in pounds per foot.) hope this comes in useful to someone else (y)
 
Back
Top