Another week has passed and had got sod all done due to being too knackered when i got in from work but tonight i managed to get all the front end dropped out ready to get it all cleaned and painted and tomorrow get all the floor pans stone chipped up and remove the mountings for the neons that were under there till i got the car

need to get a couple of new bits for the front like bump stops as mine have disintegrated and only 1 more brake pipe and thats only because the 11mm head is more round than anything where someone had a go in the past and a tiny bit of corrosion but the rest are still like new

full set of yellow poly bushes from the chaps in poland
New tie rods and track rod ends
pair of lower arms as i think my ball joints have to much play but im fussy

Also thinking of replacing the front cross member and headlight panels as for some reason they look like they have been done before and any gaps filled over with what looks like white silicone and the front chassis rail isnt welded to the front panel in the engine bay.......now this doesnt seem right to me

should it be welded to the front panel or not???

i know with my escorts and capris they are welded to each other

Also in the last week ive got off ebay a cinq abarth steering wheel £33 delivered,it needs a little clean but is very good condition and certainly better than the tired yellow one in the cinq now also got a pair of brand new coil packs for £10 delivered so was quite happy with them
