Technical Remote locking-Flashing indicators?

[Most Easterly Pandas]

Hi All
Can any one suggest a dealer in the newcastle area who can activate the locking flashers FOC or at least cheaply

No dealer will do it FOC as for starters you'll need to buy your code if you haven't already got it.

 

[stilofiat]

DONE it too!!!
I went to the dealer yesterday and told them i want this to be done. I also mentioned that it is doable . They took the car into the garage and connected it with the FIAT Computer and after 2 minutes the mechanic comes along and asks if i have the personal code. Gave them the code and 2 minutes after BLINKER is on.
Feels very good to know if your car is locked.
Thanx gays
PS: I don't have an alarm system fitted.
PS2: If they couldn't do it [pantjo] i would have come a trip to Greece and visited your dealer
Andreas (CY)
Fiat Stilo Black 1.6 3Door Dynamic, 16''Alloys

You know when you say personal code is it immoblizer code? I remember buying a code to get remote central locking to work ages ago. Is that the same code?

 

[Most Easterly Pandas]

You know when you say personal code is it immoblizer code? I remember buying a code to get remote central locking to work ages ago. Is that the same code?

I believe so.

 

[stilofiat]

Re: Flashing Indicators on cars WITHOUT alarms

I purchased elm327 cable on eBay
http://pages.ebay.com/link/?nav=item.view&id=360624259557
I have installed drivers required for this cable. When I use ScanTool prog it says communication error. When I use it on MultiECUScan it says Elm 327 or obd cable is not connected or something. There are other few programs which came with the cd and when I tried to copy these files antivirus went off.

 

[philipb82]

Whats this code then? How do i know if i've got it?

Phil

 

[mato410]

Hey guys, i have a little bit problem activating mine.

I have ELM 327 and multiecu working just fine, but when i try to activate blinkers, program requires electronic code, which when i type in and press Confirm program tells me that i have put in wrong code. So is it possible that my electronic code isnt same as for car i have? OFC i have car pass where is electronic and mechanical code.

 

[Most Easterly Pandas]

Hey guys, i have a little bit problem activating mine.

I have ELM 327 and multiecu working just fine, but when i try to activate blinkers, program requires electronic code, which when i type in and press Confirm program tells me that i have put in wrong code. So is it possible that my electronic code isnt same as for car i have?

What code are you putting in

 

[mato410]

What code are you putting in

5- digit electronic code from blue fiat key code card

 

[nikiforos83]

Just enable the Lock-Unlock Flashing Indicators!

[ame]https://vimeo.com/292392042[/ame]