Technical Problem with additive pump

Currently reading:
Technical Problem with additive pump

Compatible to pump and ecu still may throw
Additive pump open circuit back

Wired pump with 12v n ground and tapped pump, getting nothing
 
There's even several brand new ones on ebay (for peugeot 207/Citroën Berlingo/peugeot partner) for £105 delivered, you'd have to peruse to see if you could adapt it

eBay item number:335451184487 as an example
That would not fit and different , tank i need is this

Ebay item number 267242373963

A bit cheaper
 
Compatible to pump and ecu still may throw
Additive pump open circuit back

Wired pump with 12v n ground and tapped pump, getting nothing
So your pump appears knackered any way.
Ask at scrapyard, they often know what will work or not. You can always test it before fitting.
Either way it will probably need any error codes clearing if it has been unable to do a Regen due to pump failure.
I just looked on eBay and the Peugeot one is different, so no help I am afraid.:(
 
Last edited:
This post contains affiliate links which may earn a commission at no additional cost to you.
Ok im inside the tank, i need find this pump, doesn’t do anything
IMG_7850.jpeg
 
Brilliant thank you, sounds better than £367

Just wondering what use glue it all back together

If you'd have bought the kit I linked to previously, it comes with some 2 part epoxy (araldite etc) and a bottle of new fluid ;)

Preperation and cleanliness is key , also use the slower curing (24hours) epoxy as it's stronger than the rapid
 
Back
Top