Enlighten this old git who only pays £140 fully comp with full breakdown cover including Europe!!! 
General Pandas for sale and Ebay thread.
- Thread starter Steven
- Start date
Currently reading:
General Pandas for sale and Ebay thread.
- Status
Enlighten this old git who only pays £140 fully comp with full breakdown cover including Europe!!!
Well that £140 is likly to be into the £200+ range
MandaPanda pays £70 a year. That's the only thing putting me off. imagine that for a youngster like me
Will be interesting to see what yours is.
ALWAYS!!!!!! :devil: I will see it tomorrow so will let you all know..
ummm ...
you're protesting at the wrong person there I think
I just looked at your post and thought wtf. I didn't post Hmmmmm. And then noticed that it wasn't me. Just saw my sig
And will this fit my Sisley 4x4? (I hope no-one buys it because I've pointed it out
http://cgi.ebay.co.uk/FIAT-UNO-PANDA-FIRE-ENGINE-DISTRIBUTOR-829R1-829P_W0QQitemZ260331635102QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item260331635102&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A10%7C39%3A1%7C240%3A1318
Jon.
I've just got the following off of mine;
HUS47P 0D
HUS47R
525473 A
Have I got the correct bits from it? If so I'm assuming its not compatable then, as nothing looks anything alike
Jon.
This post contains affiliate links which may earn a commission at no additional cost to you.
yeah sorry, do I owe you royalties or anything?
I've just got the following off of mine;
HUS47P 0D
HUS47R
525473 A
Have I got the correct bits from it? If so I'm assuming its not compatable then, as nothing looks anything alike
Jon.
Jon only the 4x4 has the module, if you put the wrong one on the car will run and as the engine warms it will cut out and die then wont start till cold again. I'm going to get some No's for Pete tomorrow as I have a few in the garage. I bought them brand new from ebay but as usual not because I needed them but wanted newer bits on when I got the above problem. I put the original back on and it was perfect again.
No. I'll let you off this time
Oh right. So what is different about them then? Just when/where they were made, or do they have to be made esspecially?
So I take it this one is no good for mine then
(I did make a note of the correct numbers didn't I?)Jon.
I'll find out the diffence tomorrow.
A Fizz for sale 10mins from me...no docs!!!! Looks good though..i can view for anyone interested....
kev
kev
Right Jon I thought the No's were on the modules themselves but they are not they are above the 829R1 829P1 of which the Sisley has a No of SE101C-->5G. The one that didn't work was SE101A-->3L Both are Magneti Marelli units. The Modules themselves have a printed No on the top I have 4 of these and they are all different so probably a manufacturing no rather than a part No, However just above the contacts on the silicone/plastic material any with the No 9 didn't work and those with 10 did although I haven't removed the one on willie to ensure this is correct. If I have time later I will.
Just to add to this, it was a continual trial and error for which did & didn't work. When fitting the new dizzy unit with new Module it worked for 5 min I then tried changing modules only which made no difference. On putting Willies Distributor back on, once again I put the new module on it with the same result cutting out after 5 min when I replaced with Willies original module it once again ran fine. I then tried all 4 modules one at a time and two worked two didn't. I even went on to changing the internal parts of the new dizzy but couldn't get it to work. I have another spare dizzy with the No's SE101C-->(can't remember) and once again this appeared OK.
Last edited:
Oh bloody hell (some of that went over the top of my head )
So I assume the numbers I got off of mine are the correct one's (there not anywhere else like underneath are they)?
Looking at this item on ebay, the numbers I took off of mine are in the same place as pic'ed on this listing on the item (on the nice shiney bit of metal) - http://cgi.ebay.co.uk/ws/eBayISAPI....m=380087828893&ssPageName=STRK:MEWA:IT&ih=025
Jon.
(some of that went over the top of my head )So I assume the numbers I got off of mine are the correct one's (there not anywhere else like underneath are they)?
Looking at this item on ebay, the numbers I took off of mine are in the same place as pic'ed on this listing on the item (on the nice shiney bit of metal) - http://cgi.ebay.co.uk/ws/eBayISAPI....m=380087828893&ssPageName=STRK:MEWA:IT&ih=025
Jon.
This post contains affiliate links which may earn a commission at no additional cost to you.
Just been to check, because I thought I've seen one else where. Not only the 4x4's have them. Dad's 2x4 1000CL also has one.
White cap on the 1000CL
Black cap on my Sisley
Jon.
Oh bloody hell
So I assume the numbers I got off of mine are the correct one's (there not anywhere else like underneath are they)?
Looking at this item on ebay, the numbers I took off of mine are in the same place as pic'ed on this listing on the item (on the nice shiney bit of metal) - http://cgi.ebay.co.uk/ws/eBayISAPI....m=380087828893&ssPageName=STRK:MEWA:IT&ih=025
Jon.
Right the one advertised has the No SE101A which is exactly the same type as I bought but as said never worked.
This post contains affiliate links which may earn a commission at no additional cost to you.
- Status
