Technical  panda 100HP

Currently reading:
Technical  panda 100HP

fiatbakk

New member
Joined
May 26, 2015
Messages
28
Points
16
hi all.
i have a problem with getting started .
When I try to start the car it won't start.
it only starts at the 2nd x or even 3rd x
otherwise fine running and starting all day.
many replaced already.fuel pump, spark plugs, map sensor
 
Last edited:
hi all.
i have a problem with getting started .
When I try to start the car it won't start.
it only starts at the 2nd x or even 3rd x
otherwise fine running and starting all day.
many replaced already.fuel pump, spark plugs, map sensor


I will leave it to people that own the 100HP to chime in

If it was a 1.1 or 1.2 I would suspect oil / water in the inlet manifold

or dirt stopping the throttle body fully.
 
Can I ask.

When you start the car do you just turn the key straight round to start or do you pause and allow the fuel system to prime.

Tim
 
Mine did this when I had a failing coil. it's easy to diagnose with a low cost infra-red thermometer. Start the engine from cold and aim the laser pointer at each of the exhaust stubs close to the cylinder head. The cool/cold stub has a weak coil. You can confirm by swapping the coil with any other and seeing if the cold tube follows the coil.
 
Last edited:
Back
Top