Styling My Latest mod : Leds...

[Dr Zoidberg]

That looks pretty nice - some led strips don't suit the car but on a bravo could work well.

Any chance of a photo from a bit further away from the car at a normal height?

 

[Cymro]

Hi, I have done something silmilar to my Bravo , my previous post can be seen here https://www.fiatforum.com/bravo/174940-led-auxilliary-lights.html

Since then I have changed the led strips to ones that I have bought in Halfords , http://www.halfords.com/webapp/wcs/..._productId_715113_langId_-1_categoryId_165688 , and in my opinion they look better than the original ones I fitted , they are still operated by the remote relay.

Some pics

 

[craggit]

I'm going to be doing this once I've managed to order some LED lights.

Where did you order from craggit?

I know this may sound bad but i got mine off e-bay from hong kong ill see what they're like only costing £4 for both including delivery so ill reply back on here with pics when ive done will be end of next week as they take 5-7 days to arrive

 

[brav0]

Looking good cymro! I wonder if Tag had the same problem with the light flagging up there was an issue!

That's ok craggit, probably the best place to get them, led's and led's Defo liking it though, I had a look under the lid this morning, and I think Tag must've stuck them to the bit that of the headlight that just extrudes above the backing of the light. Although, confirmation and a photo would be great!

 

[craggit]

yea from what i see he has it appears to me that 48 CM strips are maybe just 1 or 2 LED's too large but i will confirm this when i receive them... what should i stick them down with?

 

[brav0]

Well.. once you've worked out where they're going and you've wired them in probably with no issue with ecu etc..

Personally I'd tape it all down in a nice looking fashion and it'll be waterproof!

 

[craggit]

I wouldn't know if it interferes with the ECU my EML is on anyway from having the HKS SSQ dump valve, should be fairly easy was thinking of glueing them down with no more nails or summin?

 

[brav0]

Hehe, need TAG to verify if eml is on at any point, if so will probablyrun a relay.

Yeah thats a good idea, i'd do that then finish with black tape to hide it all

 

[brav0]

Come on Craggit!

 

[Tad-bravo]

ok ok... better late than never.

 

[brav0]

Love it! Tag, does your EML light come on? How did you wire it all in?

 

[wegi]

Why do you keep calling him Tag?

Looks great, Tad!

 

[brav0]

Opps, can't read, my mistake Tad!

 

[Tad-bravo]

I have plugged the LEDs to the sidelights wire. I have actually removed the yellow sidelight bulbs so there's a warning showing up on my dash, but I can easily fix that by plugging them back.

and it's not the EML that's on, it's a different warning light specificly for malfunctioning bulbs.

 

[brav0]

Interesting! Did you get an adapter of some kind to connect them into the sidelight electrics or just literally plug the bare wire in?

Going to do this when I get around to it!

 

[Tad-bravo]

I just put the wires in the bulb's plug without cutting anything.

leds don't use a lot of electricity so there's no risk of burning anything or wires heating up.

 

[brav0]

Smashing, once baby has been born I shall order some LED's!