Hey all....
Some may remember me from my introduction a few months ago.
The good news is that the Panda is out of storage. I haven't been able to snap any pics just yet but I'll be sure to post some as soon as I can.
In case I hadn't posted the details earlier I've got an 88 Panda L.i.e. It has a 999cc FI engine, is white in colour, and has a beige interior.
The bad news is that now that I've had a closer look I'm starting to find out about all the small bits & pieces that are missing. This is where I'm hoping you guys can come in by finding a place where I could purchase these items at a good price, that will ship to Canada.
I've tried contacting an online site which you all recommended the first time I posted (the name escapes me...) but got no reply at all.
So... here's what I need...
- a set of the gromets that holds the rubber/carpet down underneath the rear seat. I believe I've got 1 left of about 6 or 8. I could probably get some generic ones over here, but I figure if I'm getting a few other items I may as well get the proper gromets as well.
- the drivers site "holy $#!t" handle. Not sure the real name, but that's what we call them. Basically the handles just above the door.
- the large oval 'place holder' that fills in the hole right next to the lower bar of the rear seat. One side of the car has it, the other does not.
- oil filters! I went in to change the oil the other day and realised I have no filters. Apparently there is a place in town that can get them for me, but I'm scared of how much they'll cost!
Some other things I think I might need, but am not to sure about.
- rear interior panel for the hatch. Mine is bare right now. Is that the way it's supposed to be? I'd like the interior to be as 'stock' as possible, so I'd like one if that's how the car came equipped.
- thermostat/temp sensor for the radiator fan. Mine doesn't seem to turn on when it should, or for as long as it should. Is it possible to repair/rebuild mine?
- heater matrix. My Panda doesn't emit any heat from the vents. Seeing as how I live in Canada, I'm sure you can see how this is a problem. I've seen posts saying that it's probably the heater matrix..? Again, is it possible to rebuild mine, or do I have to order a whole new one?
tia for your help everyone!
Some may remember me from my introduction a few months ago.
The good news is that the Panda is out of storage. I haven't been able to snap any pics just yet but I'll be sure to post some as soon as I can.
In case I hadn't posted the details earlier I've got an 88 Panda L.i.e. It has a 999cc FI engine, is white in colour, and has a beige interior.
The bad news is that now that I've had a closer look I'm starting to find out about all the small bits & pieces that are missing. This is where I'm hoping you guys can come in by finding a place where I could purchase these items at a good price, that will ship to Canada.
I've tried contacting an online site which you all recommended the first time I posted (the name escapes me...) but got no reply at all.
So... here's what I need...
- a set of the gromets that holds the rubber/carpet down underneath the rear seat. I believe I've got 1 left of about 6 or 8. I could probably get some generic ones over here, but I figure if I'm getting a few other items I may as well get the proper gromets as well.
- the drivers site "holy $#!t" handle. Not sure the real name, but that's what we call them. Basically the handles just above the door.
- the large oval 'place holder' that fills in the hole right next to the lower bar of the rear seat. One side of the car has it, the other does not.
- oil filters! I went in to change the oil the other day and realised I have no filters. Apparently there is a place in town that can get them for me, but I'm scared of how much they'll cost!
Some other things I think I might need, but am not to sure about.
- rear interior panel for the hatch. Mine is bare right now. Is that the way it's supposed to be? I'd like the interior to be as 'stock' as possible, so I'd like one if that's how the car came equipped.
- thermostat/temp sensor for the radiator fan. Mine doesn't seem to turn on when it should, or for as long as it should. Is it possible to repair/rebuild mine?
- heater matrix. My Panda doesn't emit any heat from the vents. Seeing as how I live in Canada, I'm sure you can see how this is a problem. I've seen posts saying that it's probably the heater matrix..? Again, is it possible to rebuild mine, or do I have to order a whole new one?
tia for your help everyone!