I've just bought a new project. A 2012 Cat C 1.2 Lounge. Apart from the usual cosmetic damage, this one has a broken left hand side top engine mount broken, which has caused a problem with the drivers side drive shaft. I don't know if it's broken or has just popped out.
I have a donor car so I have all the parts needed but have never had to do this before.
This car starts but doesn't drive because of it. I will put a new mount on first and presumably will have to get whack under that part of the engine to support it when I change the mount. Once I've done that I will need to do the drive shaft. Can anyone give me any advice on doing this. The oily bits I don't normally have to do.
I'll upload some pics of the car at the weekend.
I have to change everything at the front as usual, i.e. Front panel, rad, condenser, bonnet, bumper, wing, two lights, and lastly the airbox. Again, luckily I have all these parts already.
Any help with the driveshaft would be appreciated.
I have a donor car so I have all the parts needed but have never had to do this before.
This car starts but doesn't drive because of it. I will put a new mount on first and presumably will have to get whack under that part of the engine to support it when I change the mount. Once I've done that I will need to do the drive shaft. Can anyone give me any advice on doing this. The oily bits I don't normally have to do.
I'll upload some pics of the car at the weekend.
I have to change everything at the front as usual, i.e. Front panel, rad, condenser, bonnet, bumper, wing, two lights, and lastly the airbox. Again, luckily I have all these parts already.
Any help with the driveshaft would be appreciated.