Technical H/G Replacement - whats involved

Currently reading:
Technical H/G Replacement - whats involved

the head bolts were 13mm, by the looks of things they were the original ones.

question: can head bolts be re-used? My Autodata CD says they can - see image with the info on at top

autod.jpg
 
Here you are:

Here is the water jacket on cylinder no1, the gap between the water jacket and the edge of the combustion chamber is only the size of the fire ring, it has corroded from the water jacket side
DSCF0015.JPG

The same is happening up the road at no4:
DSCF0017.JPG

Here is a shot of 2 or 3 chamber and jacket [think its 2], and you can see the defined edge of the water jacket, and how big the distance is between it and the combustion chamber, this is how they all should be
DSCF0019.JPG

:cry:

So you see, probably not worth putting back on, or even having the work done, I have been in contact with somebody about a head, locally, just got to go and see it now to see if its gone the same way.
 
Back
Top