Ok, I'm on a maintenance roll so I thought I would take the gear lever of to either straighten it or replace it. Also, at the same time, add a sideways return spring which mine has never had in my ownership (2 years).
Per the guide, I put it in reverse, undid the rear linkage, took off the plastic tray and the gaiter, and removed the bolts on the side of the tunnel. Now I'm trying to pull the mechanism through the front but there doesn't seem to be enough room to lift it out... Is there a trick to this?
(Also need to replace the rear rubber bellows seal, whichhas split to buggery!)
Per the guide, I put it in reverse, undid the rear linkage, took off the plastic tray and the gaiter, and removed the bolts on the side of the tunnel. Now I'm trying to pull the mechanism through the front but there doesn't seem to be enough room to lift it out... Is there a trick to this?
(Also need to replace the rear rubber bellows seal, whichhas split to buggery!)
Attachments
Last edited: