endrop - for all your online needs

General Doc Orange Peel Barchetta project

Currently reading:
General Doc Orange Peel Barchetta project

sjladopoulos said:
If only Jeremy Clarkson was a member of this forum Golf club man...
:bang:
Click to expand...

Ah, forget the golf bit - don't play but the sun, beer and wine went down very well!!!

Although, I think that I had the worst hangover of my life on Saturday morning - had the first beer on the plane out of London at 07.15 Friday morning and didn't really stop until about 03.00 Saturday morning............. :yuck:
 
LittleRedB said:
Ah, forget the golf bit - don't play but the sun, beer and wine went down very well!!!

Although, I think that I had the worst hangover of my life on Saturday morning - had the first beer on the plane out of London at 07.15 Friday morning and didn't really stop until about 03.00 Saturday morning............. :yuck:
Click to expand...


is that what Jezza does to you ?
 
My locking petrol cap stuffed up a while back and I just got my hands on a replacment. I expected fitting my old lock would be a bit of a nightmare but it turned out to be just a 10 min job.

Another job ticked off :)
 

Attachments

  • 39_1_b.jpg
    39_1_b.jpg
    19.8 KB · Views: 15
Last edited:
sometimes i wonder.... what are you going to do at the end of the ride?
turn it over to fiat, saying "this is how you should have build it in the first place" :)
 
Nothing done on the car this weekend but I did get round to cleaning the garage out and sorting through all my Barchetta spare parts.

I splashed out on a few new tools this afternoon as I had a few spanners and sockets missing from my tool collection. :D
 

Attachments

  • IMG_4378.JPG
    IMG_4378.JPG
    810 KB · Views: 26
  • IMG_4386.JPG
    IMG_4386.JPG
    1.1 MB · Views: 43
Last edited:
I've been looking at your sub-installation and have a few questions. Is the volume behind the sub closed, or is it a lot of leaks? Do you get whistling sounds? If it isn't closed, is it room enough behind the panel to build a closed box and put it back there? Trying to plan a bit before I start taking things apart. :)
 
Did I read something about you putting spacers on your B, doc (not quite sure it was you who said that :confused:)? If so, any progress on that and is it doable? I wouldn't mind having my back wheels slightly further out :)

I presume I'd need longer nuts (or bolts...:rolleyes:) for that :eek:
 
Last edited:
Robot said:
Did I read something about you putting spacers on your B, doc (not quite sure it was you who said that :confused:)? If so, any progress on that and is it doable? I wouldn't mind having my back wheels slightly further out :)

I presume I'd need longer nuts (or bolts...:rolleyes:) for that :eek:
Click to expand...

I have 5mm spacers on each side on the rear wheels. Needed them for my wintertires, as they originally came from a Punto. If it's room enough to put on spacers depends on your ET. Waht dimension do you have on your tires, and how much ET do you have?
I bought my spacers on Biltema btw. ;) Just measure your bolts, and add as much mm as you space out. Not very complicated. :p
 
Um...I can't remember the dimensions I have... If I remember correctly 205/45(or 40)/16 (summer) on OZ F1s and 185/55/15 on Fiat alloys (winter). No idea how much ET (phone home :rolleyes:) I have :eek:

Btw., are these the ones?
 
This post contains affiliate links which may earn a commission at no additional cost to you.
You must log in or register to reply here.

Similar threads

R
  • Question
General Barchetta Rear Springs
Replies
1
Views
165
indalohombre
indalohombre
F
  • Question
Technical Camshaft refitting Barchetta
Replies
11
Views
402
s130
s130
R
General Henk at Barchetta Parts
Replies
2
Views
529
Wiltshire Chris
Wiltshire Chris
Haddock123
General barchetta joines Panda and Delta.
Replies
2
Views
335
Haddock123
Haddock123
StevePD
General Sold my Barchetta
Replies
2
Views
594
StevePD
StevePD
Back
Top