Guides by LittleRedB

LittleRedB
Updated
Views
18,625
For this task you will need; Trolley jack Axle Stand Wheel Brace 17mm socket Ratchet Ratchet extension Pipe grips Large screwdriver Pliers Firstly, using the wheel brace loosen the wheel nuts while the car is still on the ground. Place the trolley jack under the jacking point at the front of...
LittleRedB
Updated
Views
18,468
This guide is a reference to how I upgraded my lights to HID units and has been posted to assist anyone completing a simmilar upgrade. Should you follow this guide however you do so at your own risk. The H1 HID kit I fitted is available from...http://myworld.ebay.co.uk/diane-shop) HID Kit...
Barchetta Spring Replacement
LittleRedB
Updated
Views
14,039
You will need; 1 1/2 to 2 hours for the front spring replacement 30 mins for the rear spring replacement > A set of new springs > A Jack > An axle stand > Spring compressor set > Ratchet > 10mm socket > 15mm Spanner/socket > 17mm Spanner/socket > 19mm Spanner/socket > Hammer (of course!) >...
Back
Top