General Cruise control

[Chewie]

You do have to connect up a 12v line to power it (I already this for my Bluetooth and dashcam) and connect 2 wires to the OBD connector. I had a spare OBD plug lying around, so I just soldered the wires to that and plugged it in.

 

[varesecrazy]

Not quite sure what that would involve

I believe the CastleDonnington kit was a 'canm8'


In the end I bought a 500...as the facelifted ones have cruise as a factoty option... it works ok.. done 3k with it now

Would be nice to get it on our panda though.. as its so much cheaper..and nicer.. to go places in

 

[UKRMedic]

You do have to connect up a 12v line to power it (I already this for my Bluetooth and dashcam) and connect 2 wires to the OBD connector. I had a spare OBD plug lying around, so I just soldered the wires to that and plugged it in.

Ahh, simple enough. An independent fused line I think for it may be an idea.
That's a good idea to use a plug for the OBD connection. May splice around the back.

 

[Chewie]

The kit comes with a fuse in the supply line already, and details on where to connect it.

 

[stevem4c]

Bumping this so I can find it again should I find a suitable panda.

 

[wladans]

Hi to all! Is it possible to build in cruise control from another Fiat to Panda MK3?

 

[The Panda Nut]

Yes there are aftermarket versions and they ahvebeen reported on herein. ConradAnderson,co.uk do a really good quality kit There are others as well.

 

[wladans]

Yes there are aftermarket versions and they ahvebeen reported on herein. ConradAnderson,co.uk do a really good quality kit There are others as well.

No, I'm familiar with aftermarket versions, but I mean from another Fiat (500, Punto etc.)

 

[The Panda Nut]

They are fitted to 500s so that would almost certainly fit at least on another 1.2

 

[wladans]

They are fitted to 500s so that would almost certainly fit at least on another 1.2

Unfortunately I have 0.9 twinair 4x4...

 

[The Panda Nut]

Unfortunately I have 0.9 twinair 4x4...

Me too I asked about Conrad Anderson because they warranted the car even when new. I am failry sure the 500 TA 105 could have cruise as well. Obviously you need the brain to be compatible. Again I have seen on here hte CA made kit fits to a Panda and its plug and play no interfereance with the cars ECU I saw it on sale for £385 a couple of years back so maybe worht negotiating with a main supplier.