- Joined
- Mar 16, 2011
- Messages
- 33
- Points
- 7
As you know, the view takes on a sticky Stilos' window switches.
First, your Stilo's pull levers and remove the lower side by inserting your fingernail.
Rescued from the back of the socket carefully remove the tab at the top.
The tabs on the back of the control arm flex carefully remove the outer frame.
After removing the outer frame to the front side upside down on a flat screwdriver, carefully remove the fine-tipped fingernails.
Thus, the circuit card, the keys attached to plastic parts, conductive plastic key would be separated.
Carefully remove the key slots in each frame that holds the keys.
Take the new keys into the water boiled at high temperature.
Threw the keys on the water surface will be white.Do not be afraid.
In this way, after waiting for 5 minutes, drain the water in the hot water took place and the eye of the first key to start fresh and hard rubbing with a cloth.
A difficult process, but a little rub on the surface until there is no trace of residual
Corners and edges thoroughly rub.
Eye check and re-rub dry residue remaining places
When done with the keys inside the hair dryer to dry the water will not
Collect and distribute the same order as
We are done. Easy come. The resulting problems in the future / I am not responsible for any damages.
Last edited by a moderator: