Change Blue&me language to English
- Thread starter gury333
- Start date
Currently reading:
Change Blue&me language to English
looking for the dutch language files, anyone ?
Heb een nieuwe eenvoudige truck gevonden om bestanden te vinden op blueandme.net. Knip de link naar de website en vul deze in op:
web.archive.org
Veel bestanden om die manier te downloaden !
Wayback Machine
web.archive.org
Veel bestanden om die manier te downloaden !
Here you are !English language pack please.. can't be found anywhere on the net
Then the whole bunch of files. I just don't have the German file.
Thanks so much @Marcokal
I've created a new section in the downloads area and put them all there
www.fiatforum.com
I've created a new section in the downloads area and put them all there
Language Packs
www.fiatforum.com
- Joined
- Mar 8, 2020
- Messages
- 293
- Points
- 144
Here is the German fileThanks so much @Marcokal
I've created a new section in the downloads area and put them all there
Language Packs
Great! Added to the collection
thomas12124
New member
The English language pack has 4 files which 3 of the 4 do I put on stick cheers
- Joined
- Mar 8, 2020
- Messages
- 293
- Points
- 144
When the language files were downloaded from the blueme site there were actually 5 files in the group......one was a PDF instruction sheet not required for the car but explained what to do......you need to place ALL of the rest of the 4 files on the USB as a group but not in a folder and the flash drive USB MUST be formatted to FAT32.....FAT or NTFS will not work.....
Place the U|SB in the car then switch on ignition....should only take a few seconds to install and change over....
Picasso 3976
New member
Hi everyone ! Downloaded the French language package and installed it on my Fiat 500 1.2 : works perfectly !!
thank you so much !
thank you so much !
- Joined
- Mar 8, 2020
- Messages
- 293
- Points
- 144
Firstly you have to format the flashdrive to FAT32 nothing else will be recognised....the files have to be the only thing on the flashdrive and the smaller the flashdrive the better as the files for language are only small.....you may also need to try a different flashdrive as I have had some that did not work.....the other thing is to test your USB input on the car and place some music files on an make sure it is working....I have had many full of biscuit crumbs and old dried coffee
it works with music usb, I formatted it to fat32. but it won't start. I saw a video where the car sounds when the USB is plugged in, but it remains silent for me.
Attachments
- Joined
- Mar 8, 2020
- Messages
- 293
- Points
- 144
OK are you following the correct process......switch ignition OFF...place flashdrive in cars USB......then switch ignition ON but dont start engine.....not sure you get any sound I just use to see updating and the language was done in less than 10 seconds
It did not work that way you had advised. I copied the 3 files to a freshly fat 32 formatted pen what I had used to listen to music in the car. So the pen is correct. Do you have any idea? Can anything block the start off the procedure?
