Technical Air-Bag Node Busy Error

[Percymama]

Hi Guys

I got around to plugging in my cable and opened up MultiECUscan to do a Proxi Alignment on my 2013 Panda

All was fine until it got to the airbag node

Comes back with a "BUSY ERROR" everytime?

So essentially the Ailignment fails as it get the busy error on the air-bag node?

I did change out the air-bag module and that's why the Mileage is now flashing,

You can see the node is there, but has a busy error

But as far as I was aware doing a Proxi Ailignment would fix this, but it just keeps giving me a "Busy Error"

Can anyone here hwlp on this?

Thanks

 

[Percymama]

I have just noticed this error too guys?

 

[Percymama]

Quick Update

I put the original airbag module back in today to see if that wold show the same faults

But as you can see from the pics above and here, with the replacement module it says EOL error, but with the original module it clearly shows the EOL error present?

So does this mean the replacement module is faulty, or am I missing something here?

Thanks

 

[PuntoHowTo]

Is the replacement brand new or a second hand eBay job ?

 

[Percymama]

Is the replacement brand new or a second hand eBay job ?

I got the used replacement from a guy in Poland

But I am more and more certain it has an issue, although it has taken car of the airbag warning, and fuel cut off message, it has made the mileage flash, and I cannot do a Proxi due to the EOL error on the airbag node