conbordino
New member
Good morning,
I have a problem that I can't deal with. I needed to remove injector corrections and I used the "Reset ECU" function in the alfaOBD program, and I also removed adaptations in the engine module and unfortunately after this procedure I lost the ability to operate the buttons on the steering wheel.
I'm not sure if this was the cause, but I restored the backup settings in Alfa OBD, disconnected the battery, checked the connections, fuses, proxy alignment, errors and unfortunately I can't restore the buttons to work. The buttons are powered because the backlight is visible, the horn works,
Unfortunately, the buttons do not respond when pressed, so I cannot control the menu in the clocks or the radio. Do you have any advice on what could be the reason? Greetings from Poland, Adam.
I have a problem that I can't deal with. I needed to remove injector corrections and I used the "Reset ECU" function in the alfaOBD program, and I also removed adaptations in the engine module and unfortunately after this procedure I lost the ability to operate the buttons on the steering wheel.
I'm not sure if this was the cause, but I restored the backup settings in Alfa OBD, disconnected the battery, checked the connections, fuses, proxy alignment, errors and unfortunately I can't restore the buttons to work. The buttons are powered because the backlight is visible, the horn works,
Unfortunately, the buttons do not respond when pressed, so I cannot control the menu in the clocks or the radio. Do you have any advice on what could be the reason? Greetings from Poland, Adam.