Panda 2012+ 2022 Panda 7" Touch Screen Questions

[Mouse1903]

For this 7" touch screen that is in the current Panda 4x4 Cross (pictured below) I had a few questions if anyone can help:

- Is this a single DIN unit with only the face being double DIN size?
- Is the back of the screen panel connected to the slot / holder thing behind it?
- As Fiat ditched the Aux input, is there any form of 3.5mm jack to USB that would allow a portable CD player to be utilised i.e. allow the device to recognise the analogue signal?
- I'm assuming there are no current adaptors and facia kits that will allow replacement of this unit whilst retaining steering wheel controls?

 

[lunchbeers]

I can't speak for this unit, but I expect that rather than create a new dash, they have used a Fingle din with touchscreen and created a little duct in place of the twin vents on earlier cars.

There is a fitting kit which includes fascias and a steering wheel interface, in fact I have a spare unused fasica in that texture which I can send if you're in the UK (one in my car is gloss).

Connects2 CTKFT28 Fiat Panda 2012 - 2020 Car Stereo Fascia Fitting Kit

Connects2 CTKFT28 Fiat Panda 2012 - 2020 Car Stereo Fascia Fitting Kit Fiat CTKFT28 Connects2 CTKFT28 Fiat Panda 2012 - 2020 Car Stereo Fascia Fitting Kit - This Complete Single Din Radio Replacement Kit by Connects2 CTKFT28, allows the fitment of a Singl

www.dynamicsounds.co.uk

If you have one of these units and are looking to get rid, I might be interested.

 

[Mouse1903]

So in theory the old adaptor kit could work? I think the connections on the touchscreen unit compared to the single DIN Uconnect unit may be slightly different.

This could be an alternative to upgrading too:
Amazon product ASIN B08FT7HJW7

 

[Mouse1903]

This headunit looks decent:

Pioneer AVH-Z7200DAB 7" Flip-Out Multimedia System CD DVD DAB Bluetooth Apple CarPlay Android Auto Weblink

1-DIN 7" 24-bit true colour, clear type resistive flip-out touchscreen multimedia player with easy smartphone connectivity via a simple USB cable supporting Apple Carplay and Android Auto, DAB/DAB+ Digital Radio, Waze (Via Apple CarPlay / Android Auto), Bluetooth and a 13-band GEQ.

www.caraudiodirect.co.uk

Which possibly may work with this:

Connects2 CTKFT28 Fiat Panda 2012> 2020 Black/Silver Single DIN Stereo Fitting Kit

This Connects2 radio installation kit is design to provide everything you need when fitting a replacement stereo. This handy package takes the guesswork out of your cable selection and is carefully configured to work with a wide range of vehicle and radio models.

www.caraudiodirect.co.uk

Trouble would be the available space behind the dash, getting this new unit removed and checking if the older connects2 adaptor would work

 

[lunchbeers]

The DIN should be the same size opening and depth, it's tight, but you can fit everything in behind.

 

[Mouse1903]

Connects2 have responded to me and advised the old lead wouldn't be compatible with this new unit, nor are they planning a new lead anytime soon. I've emailed some of my local auto electricians to get their thoughts. As it's such a new unit it may be a case of waiting until I get the car to pull it out and check the connections to see what can be done

 

[lunchbeers]

Probably wise, when I replaced mine it was standard iso connectors, fakra antenna and 3.5mm plug for the steering wheel controls.

Interestingly enough, a fitting kit didn't exist for the Panda until recently, I emailed them and they said they would get on it, so it might be available soon.

I'd imagine that as it's likely to be the end of this Panda shape shortly, that the interfaces and other bits are likely the same, I can't see them re-engineering everything for a year or two's run

 

[Mouse1903]

I wouldn't be surprised if the old Connects2 leads would work or could be adapted

 

[Ondert]

Is there any possibility to fit this into my 2018 panda cross?