Hi,
had a nct (mot) fail due to a missing brake compensator rod/lever recently. The valve itself is fine (not seized) and the mount on the rear axle is fine.
anyway to cut a long story short I finally got the replacement part, could only find new item from main dealer as not all models/years seem to have this arrangement. the rod is adjustible in length with a spring at one end. the main dealer reckons it is preset but it obviously is not as it wont fit as is (adjusted to its shortest length).
Has anyone an idea of the procedure for setup ('04, 1.2, 3dr punto) ?
I have seen for other models where 55kg is placed in the boot and the lenght set at that
Thanks
Cir
had a nct (mot) fail due to a missing brake compensator rod/lever recently. The valve itself is fine (not seized) and the mount on the rear axle is fine.
anyway to cut a long story short I finally got the replacement part, could only find new item from main dealer as not all models/years seem to have this arrangement. the rod is adjustible in length with a spring at one end. the main dealer reckons it is preset but it obviously is not as it wont fit as is (adjusted to its shortest length).
Has anyone an idea of the procedure for setup ('04, 1.2, 3dr punto) ?
I have seen for other models where 55kg is placed in the boot and the lenght set at that
Thanks
Cir