Questions? Problems? Comments?
Refer to the discussion thread, found here.
- Previous page: Adjusting and testing
Refer to the discussion thread, found here.
Stilo Brake light problems-changing the switch
- Author Deckchair5
- Publish date
- Updated
- Article read time 5 min read
Refer to the discussion thread, found here.
Guide information
More in FIAT Cars
-
Panda 2012+ Cleaning the VVT solenoid actuator 1.2Poor power? VVT actuator is reponsible for altering the valve timing. It has a number of mesh... -
500X 1.4L multiair alternator clutch pulley replacement without removing alternatorThere is a good video to explain how the pulley works, but he shows a reverse thread. In the...
-
500 (Classic) Fitting front seatbelts to a 1968 Fiat 500LMy 1968 Fiat 500L never had seatbelts. It is sooo weird driving a vehicle w/o seatbelts (even... -
Grande Punto LeftHandDrive, the OBD2 port location change.LHD (left hand drive) Grande has a problem with OBD2 port access (especially during extensive... -
Panda 2012+ Number Plate LampThe basics of accessing the bulb in a Hatch mounted Panda lamp Turn on lights to see which need...
More from Deckchair5
-
Stilo Pollen filter - how to removeThe pollen filter is meant to be changed at every service interval but it's only done as an... -
Stilo HOW TO CHANGE YOUR DROP LINKS (OR ANTI ROLL BAR LINKS) IN 30MINSHOW TO CHANGE YOUR DROP LINKS (OR ANTI ROLL BAR LINKS) IN 30MINS Well first of all you, do you...
-
Stilo Fuel flap hinge repairIf you have the locking fuel flap then they inevitably will break at the hinge, usually you are...
-
Stilo 1.2, 1.4 and 1.6 engines radiator fan slow speed resistorOther engine sizes have a different electronic set up. I suspect that there will be many...
-
Stilo Cleaning injectorsI thought I’d do a case study of injector cleaning on the Stilo as I had an ideal opportunity to...