Where is the central locking?????????

[Trev]

Hi
I'm going to put a Microscan Talking Alarm in my 1997 Bravo 1.4SX I need to know where the central locking
interface is so I can connect two wires to operate the alarm and central locking, nothing at all in the Haynes
manual (maybe they could n't find it either!!!)
Any help please

 

[Chris]

Fitting alarm

Is that all could need to connect - 2 wires?

 

[Trev]

2 wires!!!!!!!!!!!!!!!!!

Hi
2 wires for the central locking (lock and unlock)
about another 15 for the microwave scanner, pin switches,
power supplys, earths, indicators, LED etc, they 're easy, just can't find the central locking unit!!!!!!!

 

[exrovermech]

Re: 2 wires!!!!!!!!!!!!!!!!!

i think u might find the interface inside the drivers door near 2 the door locking mechanism.

 

[Jonathan]

Relay

I have the big yellow central locking relay if anyone wants it, its out of my old motor because i put the remote relay in. I dont want owt for it, cept maybe a bit of money to cover postage.

I have a radio fascia in good condition too. £5 inc p&p or come and collect.

Regards

 

[SUBIJA]

ALARM

IT IS AT THE RECEIVER ON THE COURTESY LIGHT!
AT THE RECEIVER CONNECTOR THERE ARE EIGHT WIRES:-
NO. 4 WIRE IS THE EARTH (USE AM METER TO CHECK THE EARTH WIRE. THIS MUST HAS CONTINUITY WITH BODY OR GROUND. BESIDE IT IS THE WIRES NO 5 & 6.
N0. 5 WIRE FOR DOOR RELEASE
NO. 6 WIRE IS FOR DOOR LOCK

REGARDS

 

[trev]

central locking

Hi
Thanks for that, but where is the reciever for the cortesy light, a guy from Microscan alarms said the interface is in the drivers side kick panel, need to connect two wires a purple and white to the lock and unlock