General What to do

[rickstar83]

I have a 60sx punto witch has covered 180k
And is need of a new engine I also have a 1.2 16v engine loom the engine and ecu have truer selling with no luck what do I need to do to put this engine in my car to save it going to waste

Ps mine is 1.2 8v 60sx

 

[fingers99]

Lots of stuff on this in the Cento/Seicento section. It's a common mod -- a search will turn up plenty of posts. Use the 16v clutch and flywheel.

 

[rickstar83]

All I really need to know is if the engine. Loom is plug and play I disconnected it at the bulk head I have the fuel pump and every thing else like brakes ect

 

[fingers99]

I don't think it'll be quite plug and play, but shouldn't present any insurmountable problems. Ideally you need the wiring diagrams for both cars.

 

[rickstar83]

Any Idears where I can get these would like it all done by Christmas

 

[fingers99]

Downloads section? Haynes manuals?

 

[s and b]

Any Idears where I can get these would like it all done by Christmas

which christmas was that then

 

[rickstar83]

well hoping to be done by this friday engine is in just the loom to sort i have a hynes but am thinging about just changing the hole loom to save cutting anything

 

[fingers99]

Change the timing belt first.

 

[s and b]

i would reloom it,saves all the hassle if you have it

 

[rickstar83]

Cam belt was already done last week so easy. With the tools looks like a full rewrie then

 

[DaveMcT]

As @Fingers99 says in Post #2, talk to the Cinq/Sei guys who do a lot of this stuff.