OP
OP
No, I should get a dad who doesn't ask to see my winter rims when it's -8 outsideYou should get a hobby...
*snigger*
Technical What I think of the windscreen washers on the 500
- Thread starter 306maxi
- Start date
Currently reading:
Technical What I think of the windscreen washers on the 500
*snigger*
how easy to fit the new ones?
and if its just a case of pushing them in, how come they dont stay in when you push them back in after the ice pushes them out the first time?
how easy to fit the new ones?
and if its just a case of pushing them in, how come they dont stay in when you push them back in after the ice pushes them out the first time?
I'll let you know when it arrives
Looks quite easy though - maybe add a spec of superglue or clear sealent????
I'll let you know when it arrives
Or blue tack coloured with black marker pen ink.
I bet Halfords must hate you going into their shop if you have that effect on their products.
Just as a matter of interest can you turn lead into gold or water to wine?
No, I should get a dad who doesn't ask to see my winter rims when it's -8 outside
*snigger*
I bet he comes and feels at your radiators too to see if they need bleeding.
I can turn wine into water if that's any help.
And gold into CASH! Visit my website: wwww.nickyourmumsjewelleryandsellittometofundyourcrackhabit.com
Last edited:
I bet he comes and feels at your radiators too to see if they need bleeding.
I can turn wine into water if that's any help.
how easy to fit the new ones?
and if its just a case of pushing them in, how come they dont stay in when you push them back in after the ice pushes them out the first time?
Think I heard you changed the whole think i.e the bit the tube is in. Looks like have to take the plastic trim off for that. I have just superglued mine until visit the dealer. just make sure you have the aim right!
I had mine done yesterday, they did change the whole thing
My plastic bit got pushed out on Saturday ..... pushed it back in, washers work fine now......
Best get it replaced, next time you get a cold spell it will do it again now it's done it once.
The drivers side one on mine popped out the other day. Stuck it back in myself buy the wife mentioned this to the dealership when she took it in last week for the central locking to be sorted and they said to her that this wasn't covered by the warranty.
Is someone telling her porkies?
This was at the Preston dealership
Is someone telling her porkies?
This was at the Preston dealership
They are talking ballcocks. It is covered.
Cheers Mark. Thought so.
My washers have completely failed now. All the little jets are still in place and the fluid is full - but nothing - front and back. Has to be something to with the washer motor/pump because its silent when its engaged. And the wipers come on as usual when the stalk is used. Hmmph.
All the little jets are still in place and the fluid is full - but nothing - front and back. Has to be something to with the washer motor/pump because its silent when its engaged. And the wipers come on as usual when the stalk is used. Hmmph.- Joined
- Oct 6, 2005
- Messages
- 106
- Points
- 72
Bugger! N/S jet has just popped out on mine.
Add mine to the list.
Pete
Add mine to the list.
Pete
Pewsham have them in stock all the time according to their service desk.
You are right Mark, it popped out again this morning and nearly soaked the cyclist next to me! I'll ring garage and see if they have whatever it is in stock and check it's under warranty there. Thanks.
