Driver's door's a bit tatty (as, I suspect, are the wheel arches...) -- but it's only done 35,000 miles.... Lovely colour, too...!
This post contains affiliate links which may earn a commission at no additional cost to you.
How hard would it be to take the roof off this Panda and put it onto another?
I'm presuming it's a matter of drilling out the spot welds along the roof seams and removing the lot?
Black Vinyl the roof and no ones the wiser?
Thats basically it, but it is a huge job in reality. It would require removal of the windscreen and tailgate, drilling out all the spot welds along the roof seams, windscreen flange and tailgate seal flange and then carefully cutting through the factory mig welds that fill in the gaps between the roof and windscreen seams. Doable but not for the faint hearted, I thought about it briefly on my Mk1 to get rid of the horrible sunroof that is currently fitted but decided its not worth it really, if you want a Panda with twin sunroofs, just buy one
I'd be happy with a retro fit roof like the selecta had but obviously glass and openable
That's a lot of money for a knackerd car..
Shill?