xavgdt
New member
Hi all,
On my 2020 Ducato (120 2.3mj Euro6d) the stop&start function worked only a handful of times, and I can't figure out why.
I have read the status of the body computer twice (one month apart) with AlfaOBD and obtained the following
1 month ago
Shutdown inhibition from Stop&Start counters:
Climate control (NCL): 0
Outside temperature below threshold: 223
Outside temperature above threshold: 0
Battery charge below threshold: 0
Driver's seat belt not fastened: 312
Alternator not charged: 91
Bonnet switch: 0
Heated rear window: 0
Windscreen wiper high speed for 5 sec: 0
Battery sensor (IBS): 0
Driver's door open: 3
Battery efficiency below threshold: 138
Semi-automatic Parking Node (SPM): 1659
Battery temperature too low: 0
Battery voltage insufficient for startup: 0
Voltage stabilizer faulty: 14476
A/C manual climate control request: 0
Low consumption power supply mode: 20
S&S NBC startup relay faulty: 0
Now
Shutdown inhibition from Stop&Start counters:
Climate control (NCL): 0
Outside temperature below threshold: 223
Outside temperature above threshold: 0
Battery charge below threshold: 0
Driver's seat belt not fastened: 328
Alternator not charged: 91
Bonnet switch: 0
Heated rear window: 0
Windscreen wiper high speed for 5 sec: 0
Battery sensor (IBS): 0
Driver's door open: 3
Battery efficiency below threshold: 138
Semi-automatic Parking Node (SPM): 1730
Battery temperature too low: 0
Battery voltage insufficient for startup: 0
Voltage stabilizer faulty: 14498
A/C manual climate control request: 0
Low consumption power supply mode: 20
S&S NBC startup relay faulty: 0
It looks to me that the Semi-automatic Parking Node and the Voltage stabilizer faulty counters are disproportionately high, and they are the only one that increased in the past month. However I cannot figure out if they are the culprits and what to do to fix this! Does anyone have any idea?
Additionally I get the readings
Stop&Start: Absent
Start&Stop Presence: Not present
Any idea on what's going on?
On my 2020 Ducato (120 2.3mj Euro6d) the stop&start function worked only a handful of times, and I can't figure out why.
I have read the status of the body computer twice (one month apart) with AlfaOBD and obtained the following
1 month ago
Shutdown inhibition from Stop&Start counters:
Climate control (NCL): 0
Outside temperature below threshold: 223
Outside temperature above threshold: 0
Battery charge below threshold: 0
Driver's seat belt not fastened: 312
Alternator not charged: 91
Bonnet switch: 0
Heated rear window: 0
Windscreen wiper high speed for 5 sec: 0
Battery sensor (IBS): 0
Driver's door open: 3
Battery efficiency below threshold: 138
Semi-automatic Parking Node (SPM): 1659
Battery temperature too low: 0
Battery voltage insufficient for startup: 0
Voltage stabilizer faulty: 14476
A/C manual climate control request: 0
Low consumption power supply mode: 20
S&S NBC startup relay faulty: 0
Now
Shutdown inhibition from Stop&Start counters:
Climate control (NCL): 0
Outside temperature below threshold: 223
Outside temperature above threshold: 0
Battery charge below threshold: 0
Driver's seat belt not fastened: 328
Alternator not charged: 91
Bonnet switch: 0
Heated rear window: 0
Windscreen wiper high speed for 5 sec: 0
Battery sensor (IBS): 0
Driver's door open: 3
Battery efficiency below threshold: 138
Semi-automatic Parking Node (SPM): 1730
Battery temperature too low: 0
Battery voltage insufficient for startup: 0
Voltage stabilizer faulty: 14498
A/C manual climate control request: 0
Low consumption power supply mode: 20
S&S NBC startup relay faulty: 0
It looks to me that the Semi-automatic Parking Node and the Voltage stabilizer faulty counters are disproportionately high, and they are the only one that increased in the past month. However I cannot figure out if they are the culprits and what to do to fix this! Does anyone have any idea?
Additionally I get the readings
Stop&Start: Absent
Start&Stop Presence: Not present
Any idea on what's going on?