Technical Stilo Cruise Control

[nikiforos83]

I would like to ask if someone is sure that if buy a CC and connect it to the following plug will play without any other mod...

I have both the white plug in the steering and the brown large plug under the battery

Please help me!

 

[richydraper]

from memory you need to do a proxi alignment with Multi ECU Scan. with the switch installed and turned on.

 

[Yellow Peril]

From my experience, if you have the white socket, then it's simply plug and play. Though you'll need to cut your column shroud to fit the new stalk of course. There's a guide here:

https://www.fiatforum.com/stilo-guides/55049-cruise-control-installation.html

 

[nikiforos83]

I connect it to the H7 connector at steering column but no luck...Any Ideas? SHOULD it work an all gears 4,5,6?I have a 1.2 Stilo 2002 6speed

 

[nikiforos83]

I have both H7 connector AND D4a connector under battery is that odd?I had no luck conected it at H7, any ideas?

 

[paullawton2007]

Afternoon All

i have retro fitted cruise control on 2 and my thrid(current) Stilo had the white plug, bought an Alfa stalk connected it all up and did not auto work.

I done a "Cruise Control Re-learn" Via Multiscan to activate and get it working (above 30mph, and 3rd gear or above).

I then had to Activate the cruise control light and message that say "Cruise Control Switched On" using Multiscan also. i can get some screenshots etc if that helps?

Hope this helps.

Paul

 

[nikiforos83]

Just for reference , after two years having Cruise Control, finally manage to enable the CC light on dashboard!

 

[Yellow Peril]

Would you mind posting how you did it..?

 

[nikiforos83]

You must have:

1) OBD Adapter ELM 327 v1.4
2) Multiecuscan software Full version

Then you connect to Body Computer , Select Cruise Control Lamp,then press Enable and at the end you Do a Proxy Alignment.

 

[Zeewulf]

You must have:

1) OBD Adapter ELM 327 v1.4
2) Multiecuscan software Full version

Then you connect to Body Computer , Select Cruise Control Lamp,then press Enable and at the end you Do a Proxy Alignment.

I think he means adding the whole Cruise Control Stalk etc. as well as the above.

 

[Yellow Peril]

I think he means adding the whole Cruise Control Stalk etc. as well as the above.

No I didn't. I've already retro-fitted cruise. Just wanted info on activating the dash symbol.

 

[pijokas]

here is a link "Lighting the cruise control lamp"

 

[varesecrazy]

Would you mind posting how you did it..?

Following the GUIDE ..maybe...

Every car I have tried retro enabling cruise hasnt worked..as the ECU has been the wrong variant